Did I Bust Something?
#1
Did I Bust Something?
Haven't really looked at my bike since I looped it the other day but after checking it out today I noticed this dont look right. I dont do the work on my bike since I'm not mechanically inclined but looking at the bike/pics it looks like the cage used to connect to that hole somehow? Is the cage supposed to connect to the hole in the pic? That side is loose compared to the other side which is tight. Oh and its an 06 Gixxer 600 with the new style 905 cage if that matters. Thanks for any help.
#2
Re: Did I Bust Something?
looks like the cage bolt snapped off probly bent the cage to ****** chulla vista metal 905 cages dont take abuse well but some have luck with them
Last edited by Scott-; 06-03-2007 at 08:09 PM.
#3
Re: Did I Bust Something?
#5
#6
Re: Did I Bust Something?
Bike looks fine - only cracked the fairings on the side and what shows in the pics with the cage.
Do I have to order a new bolt from 905?
Do I have to order a new bolt from 905?
#7
Re: Did I Bust Something?
looks like u snapped the motor mount, u prolly need to take off the fairings and see if u did.
i dont know how the new gixers mount the motors, but ur in for some work... post up when u or somebody that knows, knows more!
i dont know how the new gixers mount the motors, but ur in for some work... post up when u or somebody that knows, knows more!
#8
#9
Re: Did I Bust Something?
#10
#11
Re: Did I Bust Something?
Take the faring off so you can see exactly what goes where. If the bolt is snapped off then you just have to drill out the broken part that is in your frame. No biggy there. If the bolt was strong enough (but probably wasent) and stripped out the threads in your frame, than you might be able to tap out the hole with a tap set and use a different bolt. Post up when you figure it out and for god sakes...dont take it to a dealer!
#12
Re: Did I Bust Something?
Take the faring off so you can see exactly what goes where. If the bolt is snapped off then you just have to drill out the broken part that is in your frame. No biggy there. If the bolt was strong enough (but probably wasent) and stripped out the threads in your frame, than you might be able to tap out the hole with a tap set and use a different bolt. Post up when you figure it out and for god sakes...dont take it to a dealer!
Like I said, I'm not mechanically inclined but I'm gonna try this one first before giving up and going to Xpo if I dont get anywhere.
#13
Re: Did I Bust Something?
Dude, go to Lowes or Home Depot and pick up a bolt extractor kit with those treated carb bits. Use a bit smaller in diameter than that bolt and get a good hole in it. Make sure you use some machine oil to keep the friction down when you're drilling. Once you have a deep enough hole use an extractor and that bolt should come out. If it just broke off and didn't strip it out then you can go buy another metric bolt. If it did strip it then dril a little larger in diameter hole and tap it for a bigger bolt.
#14
Re: Did I Bust Something?
Dude, go to Lowes or Home Depot and pick up a bolt extractor kit with those treated carb bits. Use a bit smaller in diameter than that bolt and get a good hole in it. Make sure you use some machine oil to keep the friction down when you're drilling. Once you have a deep enough hole use an extractor and that bolt should come out. If it just broke off and didn't strip it out then you can go buy another metric bolt. If it did strip it then dril a little larger in diameter hole and tap it for a bigger bolt.
#15
Re: Did I Bust Something?
Right on, good luck. Be careful not to ground out the threads when you're drilling the hole for the extractor. Always go on the smaller side and go bigger if needed.
Last edited by Outlawtorn50; 06-05-2007 at 11:53 AM.
#16
Re: Did I Bust Something?
Take the bushing off of the end and see if the head of the bolt is inside the cage .
If you also bent the cage and the hole won't line up when you are putting it back together , i think you are screwed .
Maybe loosen the other cage bolts and try lining it up
If you also bent the cage and the hole won't line up when you are putting it back together , i think you are screwed .
Maybe loosen the other cage bolts and try lining it up
#17
Re: Did I Bust Something?
Yeah sucks - my non mechanically inclined *** will see whats up this weekend but I know I'm gonna run into problems. F it tho - gotta learn somehow and I aint riding this weekend so it will be a good time to try and figure this out. Thanks.
#19
Re: Did I Bust Something?
No doubt - I'm learning that. I already brought the bike back a couple of times but I figured no better time than now to try and fix it myself. And if I mess it up I can always bring it to the shop then.
#20