2006 ZX6RR Partout or Sell
09-01-2010, 03:52 PM
#1
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
09-04-2010, 11:39 PM
#4
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
Re: 2006 ZX6RR Partout or Sell
Got most of the bike taken apart. Price list to follow:
Clip-ons: $50 for the pair with grips.
Rear wheel: $125 (no tire) $150 (with tire) but it needs a hub or at least one of the studs replaced.
Swingarm: $70
LH Controls: $20
Ignition mounted to top tree and Gas cap and seat lock (will not seperate due to keys): $100
Subframe: $60 with tray still in tact.
Lime green 520 chain: $25 rusty, needs a good lubin'
Good left rearset: $30
Bad left rearset: $20 but needs shifter.
Stock Shock: $30
Stock Clutch lever and perch: $15
Complete stock rear brake system: $50
Front Seat (recovered by me...not the prettiest but does the trick.):$25
Radiator: $60 kind of busted, not too bad. Patched up pretty solid and hasn't leaked on me,
Tank w/ tank cover: $75 in decent condition, two palm sized dents on the left side but it isn't mangled. Tank cover front bolt-down is broke but will hold with washer on top.
Stock exhaust: $80 complete.
Black side fairings: $80 (no blinkers) $100 (with blinkers) little damage, flsuh mount blinkers.
Taillight: $15 cracked and has a chip out of the bottom corner.
Passenger pegs: $60 silver.
Gauge: $125, showing just under 13k miles.
Also:
07 Red SE forks: $200 with some fading but work like a champ!
07 Red SE front wheel: $150 w/ no fading and a good condition Pilot Power.
07 Front rotors: $100
***2005 636 Frame with Oklahoma salvage title: $400
***2006 ZX6RR motor: $400
05/06 ZX6r Sick Innovations cage: $125 used, some scuffs but went on true and tight.
That's all I can think of for now, PM me if something isn't on the list and I can check to see if it was left off. Trying to build up my 636! Help a fellow dude out!
Prices do not reflect shipping. Pictures to come once the teardown is complete!
Clip-ons: $50 for the pair with grips.
Rear wheel: $125 (no tire) $150 (with tire) but it needs a hub or at least one of the studs replaced.
Swingarm: $70
LH Controls: $20
Ignition mounted to top tree and Gas cap and seat lock (will not seperate due to keys): $100
Subframe: $60 with tray still in tact.
Lime green 520 chain: $25 rusty, needs a good lubin'
Good left rearset: $30
Bad left rearset: $20 but needs shifter.
Stock Shock: $30
Stock Clutch lever and perch: $15
Complete stock rear brake system: $50
Front Seat (recovered by me...not the prettiest but does the trick.):$25
Radiator: $60 kind of busted, not too bad. Patched up pretty solid and hasn't leaked on me,
Tank w/ tank cover: $75 in decent condition, two palm sized dents on the left side but it isn't mangled. Tank cover front bolt-down is broke but will hold with washer on top.
Stock exhaust: $80 complete.
Black side fairings: $80 (no blinkers) $100 (with blinkers) little damage, flsuh mount blinkers.
Taillight: $15 cracked and has a chip out of the bottom corner.
Passenger pegs: $60 silver.
Gauge: $125, showing just under 13k miles.
Also:
07 Red SE forks: $200 with some fading but work like a champ!
07 Red SE front wheel: $150 w/ no fading and a good condition Pilot Power.
07 Front rotors: $100
***2005 636 Frame with Oklahoma salvage title: $400
***2006 ZX6RR motor: $400
05/06 ZX6r Sick Innovations cage: $125 used, some scuffs but went on true and tight.
That's all I can think of for now, PM me if something isn't on the list and I can check to see if it was left off. Trying to build up my 636! Help a fellow dude out!
Prices do not reflect shipping. Pictures to come once the teardown is complete!
Last edited by hs1113; 09-04-2010 at 11:50 PM. Reason: Added parts.
09-07-2010, 08:56 AM
#7
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
Re: 2006 ZX6RR Partout or Sell
Be looking out for a PM here in a little bit. The wheel has a small little blip but it doesn't stretch but about a half inch and doesn't effect the performance at all. I can send you a pic when I'm off work, PM me your number or email.
09-07-2010, 03:14 PM
#9
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
Re: 2006 ZX6RR Partout or Sell
I have the frame/motor/swingarm still connected together. It looks like this ^^^ minus the rear wheel. Even the forks and front-end are together, but I have two people looking for the front.
Make me an offer on the rest of it, I'll even assist in putting it back together!
Make me an offer on the rest of it, I'll even assist in putting it back together!
09-07-2010, 05:32 PM
#10
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
Re: 2006 ZX6RR Partout or Sell
Here are a few more pics of the forks and wheel. You can kind of see the little blip on the red wheel, not big at all. Need to fund my 636, help me out! Radiator isn't that bad, doesn't leak but where the hose connects on the left if it isn't tight enough. Frame is in good condition, as is the swingarm. Rear wheel has a damaged hub, needs new studs installed, will send the damaged one with it.
Any questions just PM me.
09-09-2010, 10:29 AM
#14
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
Re: 2006 ZX6RR Partout or Sell
No right rearset, and motor/frame/chassis pending sale.
Still have: Most little bits laying around, and also have the rear wheel. It will need a new hub or the studs changed out in the damaged one.
Also still have the 07 forks, wheel, and rotors.
PM me for info and quicker response.
Still have: Most little bits laying around, and also have the rear wheel. It will need a new hub or the studs changed out in the damaged one.
Also still have the 07 forks, wheel, and rotors.
PM me for info and quicker response.
09-11-2010, 09:17 AM
#19
Registered User
Thread Starter
Join Date: Feb 2010
Location: Texas
Posts: 163
Re: 2006 ZX6RR Partout or Sell
