Bray

The knock off acerbis headlights are the **** lol... and also found out why my fan wasnt working... blew the damn fuse...

Bray

OMR SUBCAGE[S]
available subcages:

Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (600/636) - 03, 04, 05, 06 07 08 09<<< click here

Suzuki

• GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
• GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08
• R1 98, 99, 00, 01

$175 Shipped

pay pal accepted


Tech

• The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
• other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!

>>click here to see why i only sell folding peg subcages<<

Zuki750

Now you need to figure out why you blew the fuse.

Bray

you're right.. i have no idea why it blew... this is a new radiator that i got after the accident... before the accident my fan was working...

Juca

hey guys was up?

Bray

They finally released you from prison?

Juca

yea ,how are you Bray? wasnt been in the prison,i am too busy with girl,graffiti and bike fixing and the sea too,damn too hot here 38 C

Bray

Doing good, ya its hot as hell here as well

Juca

old man is still alive? you fixed your bike finally?

Bray

Roger is still doin his thing, my bike is fixed LOL... am i riding yet? No

UsinMeNoggin

really or are you being sarcastic? how bright and dead on is the light and does it vibrate? any melting? how long have you had it?

UsinMeNoggin

follow the wires to the fan.

Bray

Well i hooked it up last night...Ethiopian informed me about it. Cadillaczac used to have one and steve was saying it was brighter than his acerbis...

the knock offs come with 2 35w bulbs so theres really no highbeam and i was too lazy to buy a 55w... i just have both the lights hooked up together... i havent heard any vibration they are rubber mounted... for $60 bucks im happy so far , will let you know if theres any problems... oh and another reason i went knock off is because its the acerbis blitz style... which acerbis no longer makes

UsinMeNoggin

okay, thanks for the info

old man roger

y o

old man roger

gotta load up and get ready to ride ..braaaaaaaaaaaaaaap

MikeM

If anybody wants to know why Wheelie lost his job at Shell:

http://www.youtube.com/watch?v=-5M--...layer_embedded

MikeM

bray start at the fusebox, its the bl/bu wire, and it goes directly to the fan plug without making any stops. On the other side of the plug its bl/bu again, going to the fan motor. Coming out of the fan motor is a Bl wire that will either go to the thermostat, or be grounded to the frame. Nothing after the fan motor can cause a short, so it has to be that black and blue wire. Its either rubbing something it shouldnt be, or wired up wrong. If you or chito have done any sort of fan wiring, id look there first. Then id look at the plug second, and the bottom of the fusebox third.

old man roger

braaaaaaaaaaaaap

old man roger

out .