more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
you either have a blockage or the pump isnt working right cause on the high way you should be getting plenty of air across the radiator
Re: more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
high pressure can be a bad idea , a garden hose can have over 60psi and even that can blow by seals and force water into your oil ..
on the 636 the shaft that turns you oil pump is the same shaft that turns you water pump and there is only two seals separating the two systems ..
im out going to ride
on the 636 the shaft that turns you oil pump is the same shaft that turns you water pump and there is only two seals separating the two systems ..
im out going to ride
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: more new models OMR SUBCAGES !!!
I think I will try flushing it backwords somehow
Re: more new models OMR SUBCAGES !!!
Shut up...
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
hhmmm
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
soooooooooooooo many wheelies were made tonight
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
out .
Re: more new models OMR SUBCAGES !!!
done that last year and yes the gauge is right
well the oil p.s.i. is good and it is the same pump? also with the rad cap off and the coolent level a bit low it seems to be flowing good?
I hear ya... the lot bike has never got over 230 ever and has never seen the street....
I think I will try flushing it backwords somehow
well the oil p.s.i. is good and it is the same pump? also with the rad cap off and the coolent level a bit low it seems to be flowing good?
I hear ya... the lot bike has never got over 230 ever and has never seen the street....
I think I will try flushing it backwords somehow
Re: more new models OMR SUBCAGES !!!
when slidewayz wakes up and sees neals post hes gonna judo chop his computer screen
Re: more new models OMR SUBCAGES !!!
It was a good honest review he shouldent get butt hurt by it... Sounds like the problems are being fixed
Re: more new models OMR SUBCAGES !!!
he said he would replace mine with a new one , wonder how long this process will take.
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
y o