more new models OMR SUBCAGES !!!
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!
>>click here to see why i only sell folding peg subcages<<
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
wheelies were made
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
time to watch motocross
Re: more new models OMR SUBCAGES !!!
good morning. need coffee.
Re: more new models OMR SUBCAGES !!!
Did you know un-bending a frame is next to impossible? I just want to get it back to the point that I can put a engine in it and have the wheel not rub on the fairings.
My 3 ton jack stalled out trying to bend it back that's even with using heat to soften things up a bit. I guess I need a stronger jack and a hotter flame.
And NO I never plan to ride the bike if I can get this frame bent back. I just need to get the frame to "look" usable to the state inspector.
My 3 ton jack stalled out trying to bend it back that's even with using heat to soften things up a bit. I guess I need a stronger jack and a hotter flame.
And NO I never plan to ride the bike if I can get this frame bent back. I just need to get the frame to "look" usable to the state inspector.
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
mark your back
Re: more new models OMR SUBCAGES !!!
Kinda I guess. Working 7 days a week took up most of my time. Im down to 4 now so i got some free time
Re: more new models OMR SUBCAGES !!!
Did you watch the new Bubba's World yet OMR? I have it on the dvr but I didn't get to watch it yet. I had to do a motorcycle promotion at a local community college with my brother this morning.
Re: more new models OMR SUBCAGES !!!
Oh and the street bike is done. (03 636)
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
sweet , be careful using heat on aluminum , i know your just doing it for looks but aluminum doesnt change color like steel so you can burn a big *** hole in the frame if your not careful
Re: more new models OMR SUBCAGES !!!
Well its got a few tares in it now so a hole wont matter much
The law on switching frames and clearing Salvage status around is real goofy up here. If I can get it back close enough to make it a rolling mess it will help make it a bit easyer to use the good non-titled (ins. auction bill of sale) frame I have.
Last edited by Mr. Hooligan; 05-24-2010 at 03:09 PM.
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
im confused but i gotta go do work ..lol ttyl
Re: more new models OMR SUBCAGES !!!
hello
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
lunch break
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
back to work i go
Re: more new models OMR SUBCAGES !!!
This place is dead.......
Re: more new models OMR SUBCAGES !!!
woooowoo
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
done for the night