more new models OMR SUBCAGES !!!
#3381
Post Whore Nazi
Join Date: Sep 2008
Location: VA (Bad News)! Thanks USAF. Originally from HAWAII
Age: 38
Posts: 7,994
Re: more new models OMR SUBCAGES !!!
Nope. Can't see them either.
#3382
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#3383
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#3385
Post Whore Nazi
Join Date: Sep 2008
Location: VA (Bad News)! Thanks USAF. Originally from HAWAII
Age: 38
Posts: 7,994
#3386
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
dont remember but with agron co2 mix and regular wire you can weld it , it's not the perfect way to weld stainless but as long as you get good penitration it will hold
i was just curious if you had
i was just curious if you had
#3387
Re: more new models OMR SUBCAGES !!!
#3388
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
#3390
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
cool , you will love how it welds when you get the argon hooked up , do you have a manual for that machine ? i ask cause you may need to switch a wire or two when you change over to gas
#3391
Re: more new models OMR SUBCAGES !!!
when you open the hood, they make it real obvious which wires to switch. Ive been keeping an eye out for a manual for it but not really actively pursuing it. i probably should. im gonna google why you have to switch the polarity right now.
#3392
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
#3393
Re: more new models OMR SUBCAGES !!!
Straight polarity when used in the traditional short circuit wire feed range produces a softer crackle, plopping sound from the formation of larger weld droplets. In contrast short circuit with reverse polarity (RP) produces a crisp crackle sound from smaller droplets that transfer in a more rapid manner.
Reverse polarity is used for all MIG welds. With RP the electrons travel from cathode spots on the negative work to the positive anode on the MIG wire tip. The RP electrons impart the majority of the arc energy at the MIG wire tip, melting the wire in a consistent manner.
In contrast with straight polarity the electrons travel from the wire tip to the work, with the majority of the arc energy now in the metal being welded and thanks to the conductivity of the base metal that heat is quickly dispersed. Straight polarity does not provide a stable arc and for most applications the lack of heat at the wire tip can cause insufficient energy in the weld leading to lack of weld fusion especially on parts > 1.5 mm.
Reverse polarity is used for all MIG welds. With RP the electrons travel from cathode spots on the negative work to the positive anode on the MIG wire tip. The RP electrons impart the majority of the arc energy at the MIG wire tip, melting the wire in a consistent manner.
In contrast with straight polarity the electrons travel from the wire tip to the work, with the majority of the arc energy now in the metal being welded and thanks to the conductivity of the base metal that heat is quickly dispersed. Straight polarity does not provide a stable arc and for most applications the lack of heat at the wire tip can cause insufficient energy in the weld leading to lack of weld fusion especially on parts > 1.5 mm.
#3394
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
Straight polarity when used in the traditional short circuit wire feed range produces a softer crackle, plopping sound from the formation of larger weld droplets. In contrast short circuit with reverse polarity (RP) produces a crisp crackle sound from smaller droplets that transfer in a more rapid manner.
Reverse polarity is used for all MIG welds. With RP the electrons travel from cathode spots on the negative work to the positive anode on the MIG wire tip. The RP electrons impart the majority of the arc energy at the MIG wire tip, melting the wire in a consistent manner.
In contrast with straight polarity the electrons travel from the wire tip to the work, with the majority of the arc energy now in the metal being welded and thanks to the conductivity of the base metal that heat is quickly dispersed. Straight polarity does not provide a stable arc and for most applications the lack of heat at the wire tip can cause insufficient energy in the weld leading to lack of weld fusion especially on parts > 1.5 mm.
Reverse polarity is used for all MIG welds. With RP the electrons travel from cathode spots on the negative work to the positive anode on the MIG wire tip. The RP electrons impart the majority of the arc energy at the MIG wire tip, melting the wire in a consistent manner.
In contrast with straight polarity the electrons travel from the wire tip to the work, with the majority of the arc energy now in the metal being welded and thanks to the conductivity of the base metal that heat is quickly dispersed. Straight polarity does not provide a stable arc and for most applications the lack of heat at the wire tip can cause insufficient energy in the weld leading to lack of weld fusion especially on parts > 1.5 mm.
#3396
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
ok i read it three times now and i think it's backwards ,i thought it was rp for flux core and straight polarity for solid core ?
#3397
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
easy solution , try it both ways and see what works better ....lol
#3399
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
im out been up since 7 am