more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: more new models OMR SUBCAGES !!!
just got done replacing the timing belt on the wifes neon. I hope not to own it when its due for the next one... Its a crapy job due to lack of space
Re: more new models OMR SUBCAGES !!!
Good to be home!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
now fix your bike ..lol
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
. .
Re: more new models OMR SUBCAGES !!!
I got to watch the cops taser another idiot today. When will people learn that its not a good idea to fight a cop? Never a dull moment at work...lol
Re: more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
rob you riding tonight ? probably gonna be out there around 8
Re: more new models OMR SUBCAGES !!!
check out these pics. i think the diaphram is bad. see how the left one is nice and circular and covers all of the carb body while the other one does not? it's a bitch getting the cover to seal when i put it on because the diaphram doesn't fit properly. it looks like the rubber diaphram may have come in contact with carb cleaner or something.
when i lift the part of the diaphrams which has the needle inside it (shown in the second pic) the left one comes down with suction, which you can hear and feel some resistance. the right one, on the other hand, just snaps down and you can feel little to no suction.
i'm guessing this is where the vacuum leak is. it won't suck up enough gas to mix with air before sent into the engine. am i right?
when i lift the part of the diaphrams which has the needle inside it (shown in the second pic) the left one comes down with suction, which you can hear and feel some resistance. the right one, on the other hand, just snaps down and you can feel little to no suction.
i'm guessing this is where the vacuum leak is. it won't suck up enough gas to mix with air before sent into the engine. am i right?
Last edited by Trachito; 05-24-2011 at 10:49 AM.
Re: more new models OMR SUBCAGES !!!
is there surface rust around the one to the right? Could have had some water sitting in there.
that's what she said
the diaphram doesn't fit properly.
Re: more new models OMR SUBCAGES !!!
nope, no rust that i can see.
Re: more new models OMR SUBCAGES !!!
check out these pics. i think the diaphram is bad. see how the left one is nice and circular and covers all of the carb body while the other one does not? it's a bitch getting the cover to seal when i put it on because the diaphram doesn't fit properly. it looks like the rubber diaphram may have come in contact with carb cleaner or something.
when i lift the part of the diaphrams which has the needle inside it (shown in the second pic) the left one comes down with suction, which you can hear and feel some resistance. the right one, on the other hand, just snaps down and you can feel little to no suction.
i'm guessing this is where the vacuum leak is. it won't suck up enough gas to mix with air before sent into the engine. am i right?
when i lift the part of the diaphrams which has the needle inside it (shown in the second pic) the left one comes down with suction, which you can hear and feel some resistance. the right one, on the other hand, just snaps down and you can feel little to no suction.
i'm guessing this is where the vacuum leak is. it won't suck up enough gas to mix with air before sent into the engine. am i right?
That Diaphram is Junk.. you can try to use some light grease
to hold it in place, but I think the diaphram it's self is Joonk...
Sorry man... OH they're Fooking expensive too...
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
i found them on bike bandit for $26+ but just for the diaphragm, not the black piston that holds the needle. can you get them? if so, pm me. i need 2 of them bishes
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
we used to make people with old carb bikes leave a $500 deposit , needless to say we really didnt want to work on them ..lol
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
it keeps the people that dont want to spend money on their bike away