more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: more new models OMR SUBCAGES !!!
Phkr....
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
biiiizump
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
A mechanic was removing a cylinder-head from the motor of a Harley
motorcycle when he spotted a well-known cardiologist in his shop.The
cardiologist was there waiting for the service manager to come and take a
look at his bike when the mechanic shouted across the Garage, 'Hey Doc,
want to take a look at this?' The cardiologist, a bit surprised, walked
over to where the mechanic was working on the motorcycle.The
mechanic straightened up, wiped his hands on a rag and asked, 'So, Doc,
look at this engine. I opened its heart, took the valves out, repaired any
damage, and then put them back in, and when I finish, it works just like
new. So, how come I make $39,675 a year and you get the really big
bucks ($1,695,759) when you and I are doing basically the same work?
The cardiologist paused, smiled and leaned over, then whispered to the
mechanic ... "Try doing it with the engine running."
motorcycle when he spotted a well-known cardiologist in his shop.The
cardiologist was there waiting for the service manager to come and take a
look at his bike when the mechanic shouted across the Garage, 'Hey Doc,
want to take a look at this?' The cardiologist, a bit surprised, walked
over to where the mechanic was working on the motorcycle.The
mechanic straightened up, wiped his hands on a rag and asked, 'So, Doc,
look at this engine. I opened its heart, took the valves out, repaired any
damage, and then put them back in, and when I finish, it works just like
new. So, how come I make $39,675 a year and you get the really big
bucks ($1,695,759) when you and I are doing basically the same work?
The cardiologist paused, smiled and leaned over, then whispered to the
mechanic ... "Try doing it with the engine running."
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
out back steak house burp
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
yaaaaaaaaaaaaaaawn
Re: more new models OMR SUBCAGES !!!
Re: more new models OMR SUBCAGES !!!
Can't get motivated to do anything today...
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
lunch break , wheelie would be proud it's hot wings
Re: more new models OMR SUBCAGES !!!
++++++++++++
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
you too ?
Re: more new models OMR SUBCAGES !!!
is there a secret place to get shielding gas on a sunday night?
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
just buy a big bottle and keep your little bottle full that way if you are in the middle of a job and you run out you have the little bottle to get you through ..
once you put the little bottle on get the big bottle filled as soon as it's convenient but use up the little bottle before you put the big bottle on that way you will always have a full bottle waiting ..
i have two big bottles and two little bottles but i use my welder alot more than you will ..
once you put the little bottle on get the big bottle filled as soon as it's convenient but use up the little bottle before you put the big bottle on that way you will always have a full bottle waiting ..
i have two big bottles and two little bottles but i use my welder alot more than you will ..
Re: more new models OMR SUBCAGES !!!
just buy a big bottle and keep your little bottle full that way if you are in the middle of a job and you run out you have the little bottle to get you through ..
once you put the little bottle on get the big bottle filled as soon as it's convenient but use up the little bottle before you put the big bottle on that way you will always have a full bottle waiting ..
i have two big bottles and two little bottles but i use my welder alot more than you will ..
once you put the little bottle on get the big bottle filled as soon as it's convenient but use up the little bottle before you put the big bottle on that way you will always have a full bottle waiting ..
i have two big bottles and two little bottles but i use my welder alot more than you will ..
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
. .
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
new page