more new models OMR SUBCAGES !!!
Re: more new models OMR SUBCAGES !!!
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: more new models OMR SUBCAGES !!!
Hauling 40,000 pounds of Tires from Panama City to Churchill will earn your driver $2.43 per mile, a total of $10274.48 for the entire route. If you are late you will be fined $50.00 per day that you are late.
and a new truk when i get there
and a new truk when i get there
Re: more new models OMR SUBCAGES !!!
i have a $121 left and im gonna have to refuel about 4 times on the way there. i already hit the bank today
Re: more new models OMR SUBCAGES !!!
here we go with the trux talk again
Re: more new models OMR SUBCAGES !!!
i understand california is the mecca of liberalism but why do conservatives want it to break off and fall into the ocean? it's also home of the nicest beaches and attractive air headed women.
Re: more new models OMR SUBCAGES !!!
Re: more new models OMR SUBCAGES !!!
heat cycle #1 is underway. listen to this - my radiator fan/shroud assembly is on my lawn, i didnt put it back in yet because i want to do a couple heat cycles and retorque the bolts. so i start eh motor and it comes up to temp in a few minutes. i decide im gonna let it get a little hotter than normal, then bring it back to operating temp by driving it around so air passes the radiator. so i sit there waiting for it to get hot, and i wait, and i wait, an i wait, but it never gets hot. so i give it smoe gas to bring it up to 2000 rpm and hold it there for a minute, still nothing. i go up to about 2600 rpm, and after a minute of that it goes a little hotter than normal, but only a little bit.
so im happy with that and i let it back down to idle which is about 600 rpm. i get out and put the more expensive tools away so i can drive around the hood and cool it off, but when i get back in, the temp is already back down to regular operating temperature. As in it just cooled itself off without a radiator fan.
Is this possible or is something real bad gonna happen soon?
aluminum block
600 rpm idle
64 degrees out and sunny, very slight breeze and its not parked into the wind
so im happy with that and i let it back down to idle which is about 600 rpm. i get out and put the more expensive tools away so i can drive around the hood and cool it off, but when i get back in, the temp is already back down to regular operating temperature. As in it just cooled itself off without a radiator fan.
Is this possible or is something real bad gonna happen soon?
aluminum block
600 rpm idle
64 degrees out and sunny, very slight breeze and its not parked into the wind
Re: more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
heat cycle #1 is underway. listen to this - my radiator fan/shroud assembly is on my lawn, i didnt put it back in yet because i want to do a couple heat cycles and retorque the bolts. so i start eh motor and it comes up to temp in a few minutes. i decide im gonna let it get a little hotter than normal, then bring it back to operating temp by driving it around so air passes the radiator. so i sit there waiting for it to get hot, and i wait, and i wait, an i wait, but it never gets hot. so i give it smoe gas to bring it up to 2000 rpm and hold it there for a minute, still nothing. i go up to about 2600 rpm, and after a minute of that it goes a little hotter than normal, but only a little bit.
so im happy with that and i let it back down to idle which is about 600 rpm. i get out and put the more expensive tools away so i can drive around the hood and cool it off, but when i get back in, the temp is already back down to regular operating temperature. As in it just cooled itself off without a radiator fan.
Is this possible or is something real bad gonna happen soon?
aluminum block
600 rpm idle
64 degrees out and sunny, very slight breeze and its not parked into the wind
so im happy with that and i let it back down to idle which is about 600 rpm. i get out and put the more expensive tools away so i can drive around the hood and cool it off, but when i get back in, the temp is already back down to regular operating temperature. As in it just cooled itself off without a radiator fan.
Is this possible or is something real bad gonna happen soon?
aluminum block
600 rpm idle
64 degrees out and sunny, very slight breeze and its not parked into the wind
Re: more new models OMR SUBCAGES !!!
i just got wheelie like 6 or 7 times in a row
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
you and steve have copy and pasted some of the links , i hope you dont get your ip address automatically banned when they finally delete all the spam ..
Re: more new models OMR SUBCAGES !!!
in the summer, 600rpm isnt enough to get the ac cold in kansas. 800ish will do it, but poorly. 1000 rpm is great. I havent had it in cold weather yet so i dont know how it'll do in the mornings
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
i want to turn the idle up, but its computer controlled so i dont know how. theres no throttle cable anymore. i want to turn it up a little so i dont have to step on the gas while backing up my flat driveway when im lining up to my trailer
in the summer, 600rpm isnt enough to get the ac cold in kansas. 800ish will do it, but poorly. 1000 rpm is great. I havent had it in cold weather yet so i dont know how it'll do in the mornings
in the summer, 600rpm isnt enough to get the ac cold in kansas. 800ish will do it, but poorly. 1000 rpm is great. I havent had it in cold weather yet so i dont know how it'll do in the mornings
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
using a thicker oil in a car that runs an idle that low isnt a good idea though ..