more new models OMR SUBCAGES !!!
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
OMR SUBCAGE[S]
available subcages:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
available subcages:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
- R1 98, 99, 00, 01
pay pal accepted
Tech
- The CBR 600RR , Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- The zx6 models are slightly wider than stock to keep your leg from being pressed against the tail
- other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!
>>click here to see why i only sell folding peg subcages<<
Re: more new models OMR SUBCAGES !!!
It was an F3 engine case bolt. It sheared at the point where the rear of the footpeg meets the rear tab, which was also the beginning of the threads. It was tight enough that I could barely move the peg by hand.
I gave it way too much gas by accident in a left circle. In the crash, the footpeg got bent forward, the front tab bent forward and i hammered it back. The rear tab (that ripped today) didnt show any signs of damage so i just put a new bolt in and rode. Im sure thats when it broke though cuz I havent dropped the bike since then, today i just went to put my foot on it and it was folded up.
I gave it way too much gas by accident in a left circle. In the crash, the footpeg got bent forward, the front tab bent forward and i hammered it back. The rear tab (that ripped today) didnt show any signs of damage so i just put a new bolt in and rode. Im sure thats when it broke though cuz I havent dropped the bike since then, today i just went to put my foot on it and it was folded up.
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
i knew some one would quote ..lol
flipper he just replaced the pin that holds the peg with a bolt and he ran the bolt tight so his peg didnt move easy but with the stock peg brackets the can still fold while you are standing on it , with an omr that doesnt happen because i rotate the peg brackets forward on their axis ..
flipper he just replaced the pin that holds the peg with a bolt and he ran the bolt tight so his peg didnt move easy but with the stock peg brackets the can still fold while you are standing on it , with an omr that doesnt happen because i rotate the peg brackets forward on their axis ..
Re: more new models OMR SUBCAGES !!!
with esd pegs and an omr subcage, its a real tight fit to begin with. then with a nut on there, its gets tight enough that it absolutely wont fold up by accident. The key is to make it tight enough that it wont fold up on you, but not so tight that it becomes a solid peg and wont fold when you drop it. When I drop my bike, its usually a 0-1 mph circle drop. My peg usually folds about half way up, unless its a harder drop. IMO, thats about how it should be.
Re: more new models OMR SUBCAGES !!!
i knew some one would quote ..lol
flipper he just replaced the pin that holds the peg with a bolt and he ran the bolt tight so his peg didnt move easy but with the stock peg brackets the can still fold while you are standing on it , with an omr that doesnt happen because i rotate the peg brackets forward on their axis ..
flipper he just replaced the pin that holds the peg with a bolt and he ran the bolt tight so his peg didnt move easy but with the stock peg brackets the can still fold while you are standing on it , with an omr that doesnt happen because i rotate the peg brackets forward on their axis ..
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
i dont have mine tight at all and i never have a problem , they fold in a crash and dont fold when im using them
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
almost time to make the wheelies
Re: more new models OMR SUBCAGES !!!
with esd pegs and an omr subcage, its a real tight fit to begin with. then with a nut on there, its gets tight enough that it absolutely wont fold up by accident. The key is to make it tight enough that it wont fold up on you, but not so tight that it becomes a solid peg and wont fold when you drop it. When I drop my bike, its usually a 0-1 mph circle drop. My peg usually folds about half way up, unless its a harder drop. IMO, thats about how it should be.
Re: more new models OMR SUBCAGES !!!
new pic for the ad
me, going into a circle wayyyyyyyyyyyy too fast. didnt crash but only made it 3/4 around
me, going into a circle wayyyyyyyyyyyy too fast. didnt crash but only made it 3/4 around
Re: more new models OMR SUBCAGES !!!
thats 3/4 more than I would have got...
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: more new models OMR SUBCAGES !!!
i should make some good ones
Re: more new models OMR SUBCAGES !!!
morning
Re: more new models OMR SUBCAGES !!!
blump
Re: more new models OMR SUBCAGES !!!
kin..
Re: more new models OMR SUBCAGES !!!
i still havent been able to get becky to give me a blumpkin. everything else, but no blumpkin
Re: more new models OMR SUBCAGES !!!
she probably secretly wants to, shes just scared of what your going to think of her after LOL
Re: more new models OMR SUBCAGES !!!
whats a blumpkin??