OMR SUBCAGES !!!!! new models available
#1062
Re: OMR SUBCAGES !!!!! new models available
#1064
#1070
Re: OMR SUBCAGES !!!!! new models available
Yeah I got your email but I havent sent it out yet. Ima send it out this weekend coz I need an envelope big enough to fit cd's. Peerock put
juhjuhjuh jew u-nit
under his screen name lol
#1071
Re: OMR SUBCAGES !!!!! new models available
#1072
Re: OMR SUBCAGES !!!!! new models available
word but then you gotta get the 929/954 upper and lower triple so you still gotta shell out more guap although when i had the gsxr f/e on my bike it took me a while to find the 929 triples so i spoke to a guy on here who used the gsxr triples. i got step by step instructions on what he had to do to get the gsxr triples to work so im sure with half a brain you could get the R1 triples to bolt up too
#1073
Re: OMR SUBCAGES !!!!! new models available
word. i knew there was a way to make it happen This is what homie told me about using the gsxr triples
Your lower bearing is fine (although i replaced the lower bearing with the tapered all ***** bearing and race) For the top bearing i used a 6906-2RS i got off of ebay. The bearing size is 30x47x9
Other than that i did have to mod a few minor things. The steering stops have to ground off and relocated. I Just drilled and tapped for two 10mm bolts and used those as steering stops. The stock upper bearing and race are somewhere near 14mm thick... So when i took the stock upper race out i ground it down to about 4.5mm and put it back in and put the bearing on top of it. You need the bearing to stop just just about at the bottom of the threads but not covering any of the threads at the bottom of the lower triple.
After all that it just goes right in. ... Easier said than done heh? If you have any other questions just hit me up man id be glad to help.
I did everything myself ground the spacer down with a belt sander and magnet to hold it. Then used a set of 30 dollar digital calipers i got from Lowes to measure.
Other than that i did have to mod a few minor things. The steering stops have to ground off and relocated. I Just drilled and tapped for two 10mm bolts and used those as steering stops. The stock upper bearing and race are somewhere near 14mm thick... So when i took the stock upper race out i ground it down to about 4.5mm and put it back in and put the bearing on top of it. You need the bearing to stop just just about at the bottom of the threads but not covering any of the threads at the bottom of the lower triple.
After all that it just goes right in. ... Easier said than done heh? If you have any other questions just hit me up man id be glad to help.
I did everything myself ground the spacer down with a belt sander and magnet to hold it. Then used a set of 30 dollar digital calipers i got from Lowes to measure.
#1075
Re: OMR SUBCAGES !!!!! new models available
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#1076
#1078
#1079
Re: OMR SUBCAGES !!!!! new models available
Sunday September 20th. If you wanted to you could come on Saturday and stay at my crib - you and Ego are both welcome. Only thing is its my parents crib so as long as you dont mind stayin at the crib with my folks its all good lol. If not then Sunday it is. Sunday we're gonna have some guests already for the lot session as you already know. Now I'm really going to sleep lol. Just had some ice cream Later brotha. Lemme know wassup and how you wanna do this
#1080
Re: OMR SUBCAGES !!!!! new models available
Sunday September 20th. If you wanted to you could come on Saturday and stay at my crib - you and Ego are both welcome. Only thing is its my parents crib so as long as you dont mind stayin at the crib with my folks its all good lol. If not then Sunday it is. Sunday we're gonna have some guests already for the lot session as you already know. Now I'm really going to sleep lol. Just had some ice cream Later brotha. Lemme know wassup and how you wanna do this
But i'll come up all day and into the eve sure. I'll see if ego wants to go.