03-04 636 Part Out, Clean Title
11-05-2008, 12:46 PM
#1
www.EndlessMoto.com
Thread Starter
Join Date: Aug 2007
Location: Milwaukee,WI
Age: 41
Posts: 577
03-04 636 Part Out, Clean Title
A few weeks ago my bike had a disagreement with a wall and it tucked the frame; I’m looking for another bike that will be more street legal so I can rock the streets more so this bike was for sale anyways and now with the tucked frame it obviously lost a lot of value as a complete bike.
Frame has approximately 9K miles on it, Block/Head has approximately 1500 miles on it
The bike is in fully rideable condition and was ridden as it sits on Sunday; the only damaged part is the frame itself and the lower triple, but since no one wants the bike together for a reasonable price I am parting it out.
Parts available:
’04 636 Frame tucked in the front, Clean Title, Lein Free (Still rideable as-is)(Krylon coated black) $800
Engine/Transmission/ECU/Harness Complete (has less than 2K miles, rebuilt block and head, runs very strong, no tranny problems) $1200
Subframe (Krylon coated black) $60
Tank with Full-Dent and fuel pump and gas cap (dented on side from drop) $90
Straight forks $150
Upper triple $25
Ignition key set $75
Shortened stock exhaust $30
Swingarm (Krylon coated black) $30
Front Calipers $50
Front Rotors $75
Rear Caliper $20
Front seat (no tears) $30
Rear seat (foothold cutout) $30
Stock clip-ons (Krylon coated black)(both are straight) $60
Front headlight (has cracked tabs) $50
Front upper fairing (cracked by narrow part, have both pieces to re-attach or zip tie back together) $40
Left Side fairing (these are cut-up a little as pictured to clear SI Cage and front wheel from tucked frame, all tabs are in place) $30
Right Side fairing (these are cut-up a little as pictured to clear SI Cage and front wheel from tucked frame, all tabs are in place) $30
Rear Wheel w/ Tire (will remove tire if preferred) $100
Front Wheel w/ Tire (will remove tire if preferred) $100
Front fender (all tabs in place, no cracks, scratched near front, but sandable) $20
Radiator (no cracked tabs/mounting points) $75
Cluster (not sure how to power it up since harness is tucked out of reach, has approx 8K on it, cracked lcd for tachometer line) $50
Stunt Parts:
Full-Throttle Rear Master Handbrake Setup, Includes Both SS Lines (will need front master and fluid for complete setup) $175
Sick Innovations Crash Cage (needs new long swingarm pivot bolt/nut) $150
52T 520 Aluminum Sprocket/14T 520 steel front/520 Chain (has approx. 3K on it) $60
Please feel free to PM me with questions, for pics, and for items not listed above. Some prices are negotiable so don’t hesitate to contact me. Thanks!
PRICES DO NOT INCLUDE SHIPPING, PAYPAL PREFERRED.
Here’s a pic of the bike as it sat on Sunday
Frame has approximately 9K miles on it, Block/Head has approximately 1500 miles on it
The bike is in fully rideable condition and was ridden as it sits on Sunday; the only damaged part is the frame itself and the lower triple, but since no one wants the bike together for a reasonable price I am parting it out.
Parts available:
’04 636 Frame tucked in the front, Clean Title, Lein Free (Still rideable as-is)(Krylon coated black) $800
Engine/Transmission/ECU/Harness Complete (has less than 2K miles, rebuilt block and head, runs very strong, no tranny problems) $1200
Subframe (Krylon coated black) $60
Tank with Full-Dent and fuel pump and gas cap (dented on side from drop) $90
Straight forks $150
Upper triple $25
Ignition key set $75
Shortened stock exhaust $30
Swingarm (Krylon coated black) $30
Front Calipers $50
Front Rotors $75
Rear Caliper $20
Front seat (no tears) $30
Rear seat (foothold cutout) $30
Stock clip-ons (Krylon coated black)(both are straight) $60
Front headlight (has cracked tabs) $50
Front upper fairing (cracked by narrow part, have both pieces to re-attach or zip tie back together) $40
Left Side fairing (these are cut-up a little as pictured to clear SI Cage and front wheel from tucked frame, all tabs are in place) $30
Right Side fairing (these are cut-up a little as pictured to clear SI Cage and front wheel from tucked frame, all tabs are in place) $30
Rear Wheel w/ Tire (will remove tire if preferred) $100
Front Wheel w/ Tire (will remove tire if preferred) $100
Front fender (all tabs in place, no cracks, scratched near front, but sandable) $20
Radiator (no cracked tabs/mounting points) $75
Cluster (not sure how to power it up since harness is tucked out of reach, has approx 8K on it, cracked lcd for tachometer line) $50
Stunt Parts:
Full-Throttle Rear Master Handbrake Setup, Includes Both SS Lines (will need front master and fluid for complete setup) $175
Sick Innovations Crash Cage (needs new long swingarm pivot bolt/nut) $150
52T 520 Aluminum Sprocket/14T 520 steel front/520 Chain (has approx. 3K on it) $60
Please feel free to PM me with questions, for pics, and for items not listed above. Some prices are negotiable so don’t hesitate to contact me. Thanks!
PRICES DO NOT INCLUDE SHIPPING, PAYPAL PREFERRED.
Here’s a pic of the bike as it sat on Sunday
11-05-2008, 01:53 PM
#3
www.EndlessMoto.com
Thread Starter
Join Date: Aug 2007
Location: Milwaukee,WI
Age: 41
Posts: 577
11-05-2008, 01:54 PM
#4
...
Join Date: Jun 2003
Location: Us
Age: 35
Posts: 9,589
11-05-2008, 01:56 PM
#5
www.EndlessMoto.com
Thread Starter
Join Date: Aug 2007
Location: Milwaukee,WI
Age: 41
Posts: 577
11-05-2008, 02:23 PM
#7
www.EndlessMoto.com
Thread Starter
Join Date: Aug 2007
Location: Milwaukee,WI
Age: 41
Posts: 577
11-09-2008, 08:51 AM
#11
www.EndlessMoto.com
Thread Starter
Join Date: Aug 2007
Location: Milwaukee,WI
Age: 41
Posts: 577
Re: 03-04 636 Part Out, Clean Title
11-09-2008, 02:45 PM
#12
MERK STEP UGHHHHHH
Join Date: Oct 2008
Location: baldwin, ny, united states
Posts: 4,018
11-10-2008, 01:02 PM
#14
MERK STEP UGHHHHHH
Join Date: Oct 2008
Location: baldwin, ny, united states
Posts: 4,018
