busapwr

2007 SUZUKI GSXR-1000 with Clean Nevada Title and 1,576 Street Miles For Sale

Bike is in California

VIN JS1GT77A972107294

Bike will be Sold with Stock Parts Pictured as well as the Following Race Parts:

Brand New Ohlins TTX36 Shock Set Up for 225 Pound Rider

Brand New GP Suspension Completely Built Forks Set Up for 225 Pound Rider

Brand New LeoVince Full Titanium Race Exhaust

Brand New Primered E-Racings Race Plastic, Upper, Lower, Tail, and Front Fender

Brand New Vortex Stator and Starter Idler Gear Covers

Brand New 520 Chain

Brand New Vortex 520 Sprockets

Brand New Front Galfer Stainless Steel Braided Brake Lines

Brand New Galfer Race Brake Pads

Brand New Spools

Brand New Frame Sliders

Blue Tinted Windscreen

Chromed Bar Ends

Safety Wired Per 2008 AMA Super Stock Rules

$11,000 Shipped For All Above Items and Bike

1,576 Street Miles, as Bike was Prepared as Race Bike and Never Saw the Track

Bike runs Great as Shown in Video I have of Motor Running

Have a couple more pictures and video of motor running, if needed

Asking $11,000 Or Best Offer!!!

Call (805) 404-4191, or E-mail mdgracing@sbcglobal.net with questions or offers

Thanks

Marcel Graeber

(805) 404-4191 (cell)

mdgracing@sbcglobal.net

Ex-AMA #767 / WSMC #767

busapwr

Monday BUMP!!!
Talk to those interested in my bike soon.
Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / Motul / LeoVince / Galfer USA / GP Suspension / Shoei / Lockhart Phillips USA / K & N Engineering / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Suzuki of Van Nuys / Fast 50’s / Creative Persuasions / www.GotHomesForSale.com

busapwr

Thursday Bump!!!
Let me know if you are interested in the bike with your best offer.
Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com

busapwr

Thursday Bump!!!
Let me know if you are interested in the bike with your best offer.
Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com

malott442

A PS2 with tourist trophy, and a memory card with all the suzuka bikes.... The 1000rrw is pretty badass

Plus 2 controllers and a 13" Black and white TV.


Plus 84.25 cold hard cash.!


HAHA
Seriously, wish I wasn't broke. Lots of $ and nice improvements...... But yeah, I stunt, therefore my *** is broke.

Good luck!

tricky500

11k. u gotta b ******* kidding. gtfout

busapwr

malott442,
Now you know why I stick with my man Ryan Moore's CRF50 Stunt bike.
Still expensive, but my shock on my 1000 race bike costs more than my entire CRF50.
I appreciate the well wishes and I would love to keep it, but a separated shoulder last year and a punctured calf muscle this year has put a stop to racing for me.
Have fun playing some PS2, and more importantly have a great Valentine's Day weekend.

tricky500,
The stock bike is offered at $8,000, the exhaust is $2,500, the rear Ohlins TTX36 shock is $1,700, and I have just over $1,000 in the fork internals.
The race plastics are cheap comparing at only $350 for the set, but as basic math shows, my bike should be around $13,500 without shipping, and my opening offer is at $10,500 plus the shipping, just in case to the other side of the country at $500.
Racing isn't cheap, especially when you want to compete at the AMA level as I did.
Hope my numbers cleared up the deal I am offering, and you also have a great Valentine's Day weekend.

Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com

tricky500

How much for the rash?

dude i'm not tryin to hate but that bike isn't gonna sell here.

vasponger

Yeah but to build a Race Bike and have the money to race it is far from cheap. Its a good deal for someone looking to build a 07 and save them time and money. But yeah I agree not many racers on here.

pigs01GSXR2

I would try the WERA 13X Board but bump for a Track Weapon...

busapwr

Thanks guys for understanding the sales of the higher end product, even if the buyers aren't here specifically, it may still get seen by someone out there that lurks the site.

Tricky500,
No worries, because as I said, a 20 m.p.h. tip over and I separated my shoulder is what caused the light scratching of the plastic.
Since I am throwing in a brand new set of unmounted, unpainted plastic, that set will be a back up to the new owner.
Since I know how Britton sets up his stunt bikes, like super stock or super sport race bikes, I figured I would just throw this and my 600 race bike up and see if anyone wanted to have a fully set up bike for stunting, or racing.
Ads get lots of lookers, some talkers, but only need one buyer.

I have sold a few race bikes, since I raced a 2001, 2003, and a couple of 2005 GSXR-1000's, so these last race bikes will be just that, the last ones I will have to sell.

To all, have a great weekend and thanks for the good luck wishes on my sales.

Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com

frayz

Is this an infamous 600/750/1000?


also how do u have an "ohlins" rear shock and a "tuned" front end yet no stabilizer..

busapwr

frayz,

This is the 1000.

Yes I have the Ohlins shock and fully rebuilt fork internals without a damper, other than the stock one that is.

The stock damper is electronic, and works well.

If, and this is the biggest word of the equation, your geometry is set up well, a damper doesn't help much.

In stunting a damper helps because you get the bike geometry up close to that of a unicycle, and a damper stops the shakes.

On a road race bike we can fine tune the front end to get the rake and trail just right so without a damper the bike won't shake.

Also, the application of the throttle also totally affects the geometry, as you gas the bike the front becomes unweighted and thus changes the front end geometry.

On a stunt bike, during a stoppie, more or less throttle doesn't do much, but the front brakes do, and thus much more of a need for the damper.

I hope I shed some light on my race bike set up, but most people spend money on unnecessary items because they don't know what they actually need.

Thanks for the question.

Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com

tricky500

ahh lil respect. i give it to ya.

GrapenCrazy

ill give you my old mongoose and 3 saw daddys and a brewha

GrapenCrazy

thats worth about 16,000$let me know

busapwr

GrapenCrazy,
Sweet deal!!!
I really want a Mongoose, as long as you are talking about a BMX bike.
Thanks for the BUMP!!!

tricky500,

I appreciate that, thanks.

I was a Mechanical Engineer for 10 years before I quit all that and decided to road race professionally.

I also never do any motor work to my bikes to keep the reliability high, as I raced two 200-mile / 80-lap races on the same 1000 motor.

One race I finished 10th and the other I finished 14th out of the 40 racers that started.

That bike also was raced for a year and a half without any problems, mainly due to my preventative maintenance.

We as riders are never going to be able to ride the bikes to their limit, because none of us are good enough for them in their stock form.

I change the necessary items that fit my budget and make my bikes competitive at the AMA level.

Again, thank you for the public compliment.

Have a great weekend.

Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com

malott442

How did you like life as an ME? I'm finishing my Junior year, hoping to work more as a design side, but who knows........ just want my BS because I can't find a job that pays around here without one...

busapwr

Malott442,

I enjoyed all of my jobs, as I designed in SolidWorks mostly and that made my "jobs" easy.

I have designed high performance Harley Engines and Transmissions, Fadal Machining Center CNC's, Automation Machinery, and a host of other miscellaneous machines like Silcon Wafer Polishers and Grinders.

Check out my first listed ex-sponsor to see what I am doing to make a living now.

Hope you finish up school strong, and the best thing about Mechanical Engineering is that you can really go into any field you want to, as most fields need Mechanical Engineers, so choose what you like and I am sure you can make a good living in that industry.

Have a great rest of the weekend and feel free to call me to discuss my professional career as a Mechanical Engineer.

Thanks.
Marcel Graeber
MDG Racing
(805) 404-4191 (cell)
mdgracing@sbcglobal.net
Ex-AMA #767 / WSMC #767

www.gotmotoparts.com / Central Coast Mechanics / Bombay Motorsports / LeoVince / Motul / Galfer USA / GP Suspension / Shoei / LP USA / K & N / E-Racings / www.slime.com / Suzuki / Dunlop / WSMC / OFD Racing / 50Stunt / ESD - MFG / Fast 50's / Suzuki of Van Nuys / Creative Persuasions / www.GotHomesForSale.com