im just about to get one...

would the RC51 forks, and wheels fit?

my new winter project...wait til you guys see it

and the motor is a Mild version of the 900 rr right?

hook it up fellas.

 

working on something new since the 954 accident?

 

alot of peolpe say the rc51 rims WONT fit, but alot others say you need adifferent spacers, considering the **** ive seen people do with custom bikes, it honestly cant be that difficult

if the forks are the same size as the 900 929 and 954 then the rc ones will fit too, i would definately think they would be, but check on honda.com or some official sites with specs

the motor is a 919 cc version of the 900, and from what ive read not as bad ***, but easy enough to boost up

a cat in bmore stunts a 919, he knows alot more

 

I will venture to say that all Honda sportbike front ends can be swapped to any Honda sportbike. I have even seen a R6 front end on an F3 at Stuntwars. You might have to change the bearing races in the frame, but that is about it.

The other catch....clearences. I put a 954 front end on my F4i, and it is tight....there is about 1mm between the lower tripple tree and the frame. With the upper and the headlight on, the lower tripple hits the back of the headlight first. Granted you won't have to deal with this since the 919 is streetfighter.

The rear rim could be made to work....Worst case senerieo, you would have to switch the wheel bearings for ones that fit the 919 axle and make new spacers.