How do i do a fast wheelie?
12-06-2003, 01:42 PM
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Kenwood, Ohio
Age: 40
Posts: 37
How do i do a fast wheelie? I have been riding for about a year now and i can do a wheelie starting in first gear and poping the clutch. i start out and pull the clutch in at 4000rpm then let go at around 9000 rpm. I want to do a wheelie while moving faster, in a higher gear. Does anyone have any advice on how to do this on a ninja 250r? Thanks
here is how, ride your bike down to the local dealer, and get a 600
12-06-2003, 06:58 PM
#4
Registered User
Join Date: May 2003
Location: Hawaii
Posts: 729
yeah a faster biek would help you do a faster wheelie........
but if you wanna take it to the fastest possible ............. i suggest you learn how to shift gears in a wheelie..... just keep the wheelie high but not at balance point..... just keep on chasing the damn wheelie. im guessing you should be able to hit 100 maybe?
but if you wanna take it to the fastest possible ............. i suggest you learn how to shift gears in a wheelie..... just keep the wheelie high but not at balance point..... just keep on chasing the damn wheelie. im guessing you should be able to hit 100 maybe?
12-06-2003, 09:14 PM
#5
Registered User
Join Date: Jun 2003
Location: cranberry twp, pa
Age: 41
Posts: 37
about 90 is the fastest i'd say, anything over 95 is when you're watching the speedometer go up 1mph at a time, unless you're really good at balancing it without the throttle, but the only thing you can really do is get it as high as you can, and shift
12-13-2003, 07:48 PM
#8
Registered User
Join Date: Sep 2003
Location: Ohio
Age: 49
Posts: 421
build a ramp and get going as fast as you can hit it then that 250 should come right up. I had a 250 for a year its not a good stunt bike or wheelie bike. Trade it in for a nice shiny 1000 the new honda cbr is here in a few months.
12-14-2003, 10:52 PM
#10
Registered User
Join Date: Sep 2003
Location: o'side
Age: 45
Posts: 37
gear the **** out of it, and even if you did that you would probably just spin the tire with the little tire thats on there.
but if you could learn that would be pimp you would be the only one stuntin a 250 ninja that ive seen
but if you could learn that would be pimp you would be the only one stuntin a 250 ninja that ive seen
12-15-2003, 01:36 AM
#11
I Enjoy Posting At StuntLife!
Join Date: Oct 2003
Location: St Louis, Missouri
Posts: 1,303
they really aren't that hard i have done 2nd gear on my friend 250 before and then i was able to stand on the back of the seat and power up in 3rd, but didn't get to bp and ride it just sorta kept on powering it. get a bigger bike though they aren't that fun, can learn to do endos pretty easy though.
Thread
Thread Starter
Forum
Replies
Last Post
