Joshua

I have a 250 ninja. In first i can rev it up real high and dump the clutch. But it drops real fast what do i need to do to keep it up and ride it a long time.

pimpinem3

when u turn 16 get a 600

Fizzer

Beleive it or not, my friends G/F rides out some ok wheelies on hers!

Rich-NY

well if it comes up and then drops quickly, that probably means your getting nervous and backing off the throttle or your not getting high enough.

You need to keep on the throttle and then get that thing to its balance point.

red96camaro

you rev out cause you aint at the balance point, get it higher and the RPMs wont increase when your riding it

clumbsybiker

dont forget to cover the rear brake! clutch it up at lower speed and get it high fast. That should give you more distance too!

hayez

aint nothing wrong with a 250 atleast he is wheeling it

Lb3

No doubt. I rode one of those home for a guy once and maybe it was just ragged out but that thing had no kinda power. Felt like tryin to wheelie a 250 pound xr50. If you are getting it up just keep practicing you will be there before you know it.

Fizzer

like ive read once "If it dosent have a side car, it can wheelie"
And no there isnt bad riding a 250, atleast he's not a noob jumping on a 900. get confortable.

hayez

if my fat *** can wheelei a xr100 in 3rd with 210 pounds im sure you can wheelie a 250

nags

hayez, keep trying... that xr will come up in 6th gear

hayez

i never trued it in 6th..hey what gear do you 12 on th2 xr?2nd seems to work the best so far....learning some decent =brake control so far...still cant ride good wheelies on it...keep swaying left and right and falling...but im also on grass...dont have any paved lots close by to ride it in...

aussie style

Hi I ride an RGV250, wheelies suck on this too. I give mine a heap of revs, lean back n pop the clutch aswell. What gear are you trying to wheelie in? If your in 1st try 2nd with a small bounce, if that doesn't work use the clutch aswell.(I do. comes up higher n faster) If you find it hard to bring up in 2nd use 1st to get it up then shift to 2nd ( no clutch, roll off the throttle shift quick then get on the gas quickly) you will get more distance.
I don't get it up to the b/p (no engine brakes in a stroker & I **** myself) I'm still chasing them. anyway hope this helps you out.

P.S. As you can tell I'm not the best at wheelies myself, this is just how I do them. ALL THE BEST!!

R6AJ

Im thinking about getting the 250 as my first bike, but dont like the styling. Ilike the R6

snglsidedblade

****......I tried stand'n up a newer Kawasaki 250 and couldn't do it. My fat @SS was standing on the rear pegs tried bouncing it and clutching it........thing was a dog!!!

CldMind

I can ride out short - high wheelies on it but it is scary as **** because you have to dump the clutch at like 10K. It comes up real quick but you dont have much engine breaking cause your only going like 5 mph.. If u can wheelie a 250 you can kill on a 600

thewibb

It will come up, my buddy had one and I wheel'd the shiz out of it. Either use abounce and the clutch or roll on then off and use the clutch at the same time.

Squidmark

Yeah, I ride a 250ninja (first bike) 7-8000rpm, 5-10mph and let the clutch out (i use one finger to grab it). If that doesnt work as well, drop your left leg back to the pass. peg and try it that way. I had a nice one to the balance point today, but chickened out after a while. Keep practicing, it gets easier.

-Squidmark

SkiTchN

NITROS!!!!!!!!!!!!!!!!!!!!!!!!!

TonyC

yeah, i started on an EX250 ninja. I can wheelie those pretty good. Put your left leg on the passenger peg and cover the rear brake with your right. make sure you get used to braking before you flip. I usually roll just enough to keep from tipping over while i have the throttle at like 10krpm. just pop that clutch and lean back....the only way is practice practice...

good luck man
Tony