PeterNoggin

I was under a old post back in the day when I think it superstunna's post about his bike..... my question is how hard is it to swap out the I think it was 06/07 front ends and rear swingarms to a 03 636?

Pros and Cons would be nice

I'm thinking I would need spacers right?

Suicidl

just put the forks in your 03-04 triple. you will need rotors though. the swingarm you just need to pull the dust seal out and the metal looking nut thing on the brake side of the swingarm then just bolt it up. you will also need the wheel, brake caliper bracket, rear axle, and wheel spacer i also did the shock because the 03-04 hit the swingarm. you can use the 03-04 wheel but will need to do some modifying.

PeterNoggin

is there a big difference to you when you did that or was it really or looks?


Are those forks powder coated too?

is the setup 06 07 or 08

Suicidl

forks are 07

and with the swingarm it feels that it raises the rear about a inch and is a little stiffer

PeterNoggin

ok good lookin out

frayz

*****. You made the swaps so much easier than everyone else whos tried to explain them to me.


-MY- Solution: Sell an 04, buy an 06.

PeterNoggin

LOL right

Suicidl

it is that easy

PeterNoggin

so 06 swingarm is good then right? just double checking because Im about to buy and 06 with the shock included