600rr FUEL PUMP
#1
600rr FUEL PUMP
The damn fuel pump isn't turning on. I built this bike from scratch, got everything put together, all the plugs are plugged in, vacuum lines are all in. I turn the ignition on and I can't hear the fuel pump turn on. Everything seems to be hooked up right and working except the fuel pump. Been working on this damn bike the last 2 days, thought I was gonna be done tonight but I guess not.
Any ideas?
Any ideas?
#2
Re: 600rr FUEL PUMP
check the gauge harness, www.600rr.net has a sticky in stunt section on rewiring to eliminate the gauge harness all together..
-M
-M
#3
Re: 600rr FUEL PUMP
The tip over sensor in the front is VERY VERY touchy...I have it sodered with a jump wire..but that was the ONLY thing that kept going wrong associated with the fuel pump in my year+ with this bike!
#4
Re: 600rr FUEL PUMP
Alright I'm over it. I'm just gonna bring it to a shop and let them figure it out. They gotta re-do my forks anyways.
Oh yea, I don't think its the tip over sensor. I break open the sensor, drain the water and rip out the piece that swivels. That way I never have to worry about the wiring and don't have to touch it.
Oh yea, I don't think its the tip over sensor. I break open the sensor, drain the water and rip out the piece that swivels. That way I never have to worry about the wiring and don't have to touch it.
#6
Re: 600rr FUEL PUMP
Found it...
ok ok guys good news is that it fixed.
over tha last couple days i did some researching and asked the previose owner some questions.. i guess he tried to replace the ignition with a 2006 600 rr and it should have been a 2004 !!
the diference between then is.... 2006 they swithced to a 2 wire only set up going to the ignition !!
this guy has 2 wires on the new igniton set he bought and made it into a 3 wire with the pink by soldering that other crap on there and splitting the wires. !!
so..
i bought a brand new 3 wire plug the screws into the bottom of the ignition and the feul pump kicked right on !! and the bike started right up !
yess !! going riding sunday and yeah its only gonna be 46 degrees !! hahah **** it..
thanks for the help everybody.
hope anybody reseaching this **** can find this post usefull...
and... now that i got the right ****...
im going to figure out exactly how many volts the pink wire should have when i muti test it tomorrow.
stay tuned form more awnsers.
-manubi-
over tha last couple days i did some researching and asked the previose owner some questions.. i guess he tried to replace the ignition with a 2006 600 rr and it should have been a 2004 !!
the diference between then is.... 2006 they swithced to a 2 wire only set up going to the ignition !!
this guy has 2 wires on the new igniton set he bought and made it into a 3 wire with the pink by soldering that other crap on there and splitting the wires. !!
so..
i bought a brand new 3 wire plug the screws into the bottom of the ignition and the feul pump kicked right on !! and the bike started right up !
yess !! going riding sunday and yeah its only gonna be 46 degrees !! hahah **** it..
thanks for the help everybody.
hope anybody reseaching this **** can find this post usefull...
and... now that i got the right ****...
im going to figure out exactly how many volts the pink wire should have when i muti test it tomorrow.
stay tuned form more awnsers.
-manubi-
#8
Re: 600rr FUEL PUMP
im using a 04 motor and an ignition for a 03. so it should work fine. Ive already dropped the bike off at the shop yesterday. i have a feeling its something stupid too. i was workin on the bike all damn day and until midnight. im sure im over thinking it and missed something. Ill let you guys know what it was.
Thread
Thread Starter
Forum
Replies
Last Post