onewheelneil

I have to order a clutch today for my 93 900rr,my questin is: do I need to replace the steel plates? All the kits I have found that I can afford do not include them.I have been planning a week long beach trip forever,I got all my boyz ready to go this weekend,and all this clutch **** is happening! I have a new basket I am installing tomorrow,and the clutch kit needs to be done by friday. my budget is about a $100 I been on here for a while,and I know alot of you know a hell of alot more about this than I do! I could really, really use y'alls help

-matt g-

the clutch plates are the most important things to replace.. the steel plates that divide each clutch plate do not need to be replaced unless they are warped or worn out very badly.. chances are no they do not need to be replaced

CHADf

just buy the clutch plates,soak in oil, then install the the same way they came out(clutch plate,steal plate,clutch plate,steal plate,etc....)

-matt g-

or buy a dp clutch kit.. no oil soaking needed :YEAH

onewheelneil

thanx for all your help! I kew I could count on my fellow stunters to help me out.I posted this same **** on both the cbr websites and only got 1 reply,he said the same thing you did VTR1000! will this be ok its in my budget http://cgi.ebay.com/ebaymotors/ws/eB...144351622&rd=1

-matt g-

yeah.. that will get the job done.. dp clutches make a kick *** kit if you can afford one of them i'd look into it

Catman

If you take your steals and stack them up , you can see if any have burnt marks from heat or if they are warped.they can also be cleaned back up

onewheelneil

how can I go about cleaning them....brake cleaner,or do I need to sand them with a super fine gritt like 2000 or somethin

onewheelneil

damn catman! I tried to send you a pm but its full up

onewheelneil

I was lookin at the dp,its my 2nd choice.I was wantin to go with the ebc from ebay in the reply above.whatcha think about that one.....price is the only reason,I've got a low budget

-matt g-

it'll work

onewheelneil

cool, I'm clickn over to buy that beooch now

Catman

yep, sand paper or steel wool, just a little bit to get the burnt marks off.

onewheelneil

thanx catman....prolley ought to empty that mailbox huh??

CBeRR900

not to jack your thread, but i got another 900 clutch question. Will the clutch in the 893 (93-95) be a direct replacement 919s (96+) or are they completely different?

onewheelneil

I am pretty sure they are diffrent,check ron ayers website out,they got fiche with part numbers,,,just match em up

f4ibry

onewheel:

just a word of advice, use your stock springs if u buy that ebay clutch kit....i bought a clutch kit and new springs a few years ago and i made the mistake of pitching my stock f4i springs and puttin the aftermarket ones it...

ur clutch will be 100times stiffer even with an ez pull..its kind of annoying and differnt to get used to if u have a naturally soft clutch

that being said who has stock f4i clutch springs lol??

onewheelneil

I will keep that in mind! thanx bro