Re-Micks

i just put my acerbis headlight on and my bike was cutting out, i found out it was cuz the vac tubes or the air lines for the carbs wasnt getting air to it... so i ran one all the way to the front and it started to run better but not great.. im sure there is some one out there that had or has a f3 and did a front end mod that could please help.... the line runs up the frame on the left side and runs to the front..... let me know some one .... im sick of having a funnel on it to get air... and it still acts up

Catman

JT = ( JT stunts, cincyextreme ) at fairfield Honda can probably help get you straight. He stunts an f3, and is the parts manager or service manager there

Wheeliest

in your ram air part of the intake system on your F3 hteres little air scoop things that are about a inch in diameter, unscrew them out of it and apply one to the end of the hose, problem solved.

DerekS

Whens it running like ****? what rpms?

Cause i just bypassed some wires and **** and mine worked fine.

Re-Micks

yea it cuts in and out at higher rpms.. with the tube disconected at the clip on the frame it cut in and out all the time.... what wires? let me know need some help...

also wheelist... are you talking the ram air in the middle of your forks and are those holes just past the forks or more under the tank...

Wheeliest

im talking about the little tube things that connect at the end of the tubes that lead all the way to the upper.

DerekS

Yo i pm'd you... i hope that stops the problem.