Is dis it ??
#1
Is dis it ??
My tip over sensor ?? 2000 gsxr 750
It is mounted in the same place as the pic in the gixxer help thread, but looks alittle diff. ???
And it only looks like it works side to side not back and forth
It is mounted in the same place as the pic in the gixxer help thread, but looks alittle diff. ???
And it only looks like it works side to side not back and forth
#4
Re: Is dis it ??
Originally Posted by Mr. Farley
yea, when the bike tips over it cuts out. Place your tip sensor on a perfectly flat surface and fill it with Silicone. Voila, no more problems.
#5
Re: Is dis it ??
Originally Posted by Hinks
I used zip ties on mine, 1 on each side of the center ring and tightend them down worked good for 3years and wasn't as messy as silicon and didn't have to wait for it to dry
#6
Re: Is dis it ??
Originally Posted by Hinks
I used zip ties on mine, 1 on each side of the center ring and tightend them down worked good for 3years and wasn't as messy as silicon and didn't have to wait for it to dry
+1
I used to use duct tape, wad it in there to stop the ring from moving but realized on my second one that zip ties are much easier and work just as well as duct tape or silicone.
#8
Re: Is dis it ??
where is the sensor at on your gixxer? i need to do this to my buddies bike.
http://www.youtube.com/watch?v=uFhcPsm3qjk
http://www.youtube.com/watch?v=uFhcPsm3qjk
#11
Registered User
Join Date: Sep 2004
Location: Motor City Freestyle in Detroit Michigan (0-o)
Age: 43
Posts: 2,837
Re: Is dis it ??
Originally Posted by Hinks
I used zip ties on mine, 1 on each side of the center ring and tightend them down worked good for 3years and wasn't as messy as silicon and didn't have to wait for it to dry
Thread
Thread Starter
Forum
Replies
Last Post