joey23792003

I recently bought an acerbis headlight and Im having a hardtime getting it to work. The headlight has 3 prongs to connect the wires to, what colors am I connecting to which prong? please help......Thanx for the support fellas...

tohype4u2

i just tapped into a hot wire hi/lo beam and did the same for the ground crimp all 3 together using butt connectors then you have 1 wire and use quik disconnects .

or you can ground them to differnt gorunds im gonna do that thats the way i intially did mine wit no probs

now i blow fuses like crazy

Tony L

there flip-able match the three wires that are the same color ground them the take the other three and put them to a positive feed. AKA the battery run a inline toggle to turn on an off. unless you wanna run it to the wire harness make sure to run an inlike 40amp fuse

tohype4u2

is the 40 amp fuse a higher rated fuse I keep blowin fuses all 3 positive crimped into 1 hot wire

all 3 grounds are crimped into a 1 gound off the harness mind you i have a gixxer but the 15 amp fuse keeps blowin should I ground each to a seperate ground