Oil light on
#1
Oil light on
So I went out tonight working on the spreader stalls, and noticed the oil light coming on repeatly. Well now the bike makes a little funny noise and the oil light will not turn off.
I just did a oil and filter change a 70 days ago, and the oil level is fine.
Any suggestions?
Thanks, Debo
I just did a oil and filter change a 70 days ago, and the oil level is fine.
Any suggestions?
Thanks, Debo
#3
Re: Oil light on
dont ride it or think bout it for a day
it should fix right up!!!
na but maybe u need to drop ur pan and check it out man
do u have a pickup?? or just overfill stock? my light comes on a lot on stock pickup overfilled specially near bar or near stalling
it should fix right up!!!
na but maybe u need to drop ur pan and check it out man
do u have a pickup?? or just overfill stock? my light comes on a lot on stock pickup overfilled specially near bar or near stalling
#4
Re: Oil light on
Originally Posted by f4ibry
dont ride it or think bout it for a day
it should fix right up!!!
na but maybe u need to drop ur pan and check it out man
do u have a pickup?? or just overfill stock? my light comes on a lot on stock pickup overfilled specially near bar or near stalling
it should fix right up!!!
na but maybe u need to drop ur pan and check it out man
do u have a pickup?? or just overfill stock? my light comes on a lot on stock pickup overfilled specially near bar or near stalling
MY LITE SOME ON ALL THE time it just usually goes off.......i normally run aboot a gallon or so of oil in my bike.......
#10
Re: Oil light on
Originally Posted by DEBO
I already have FI codes going off, because I have no 02 censor....
Can you still pull other codes?
Can you still pull other codes?
#12
Re: Oil light on
Originally Posted by MR. RYAN SMITH
THE BIKE WILL SIGNAL MULTIPLE CODES. LONG BLINKS ARE 10 AND SHORT ONES ARE 1, IT WILL SIGNAL ONE CODE, SPACE, AND THEN THE OTHER(S). LET IT CYCLE THROUGH A COUPLE OF TIMES TO DOUBLE CHECK YOUR COUNT.
and thanks for your help Ryan!!!!
Last edited by DEBO; 07-06-2006 at 06:48 PM.
#13
Re: Oil light on
Originally Posted by DEBO
Is there a place online to check codes?
and thanks for your help Ryan!!!!
and thanks for your help Ryan!!!!
#14
Re: Oil light on
first things first, pull the sensor and turn the bike over, make sure you still have pressure, then replace the sensor. If you have oil pressure and the sensor is good, yet motor still makes funny noise, you spun a bearing either big end or at piston pin.... send it to me, or replace. the more you run it the more damage it will cause, might be salvagable now. Either way stay away from any fast, high rpm ****.... my guess is #2 con rod is gonna touch a header soon.
#15
Re: Oil light on
mines comes on in stoppies
#17
Re: Oil light on
hmm.. never heard of that
Thread
Thread Starter
Forum
Replies
Last Post
trabich
Bikes for Sale
1
11-17-2012 12:15 PM