HEY!!! help with my bike! please

Thread Tools
 
Search this Thread
 
Old 05-05-2006, 08:49 PM
  #1  
Registered User
Thread Starter
 
NastyNikolai's Avatar
 
Join Date: Apr 2006
Location: Glendale, Az, USA
Age: 40
Posts: 43
NastyNikolai is an unknown quantity at this point
HEY!!! help with my bike! please

ok, so today i was riding, and out of NO WHERE my bike starts making this nasty sound, followed by a wicked vibration. the bike idles rough after 5 grand, and when im riding it after 5 grand it vibrates. its either a clutch problem or...? has anyone ever encountered this problem i would greatly appreciate the advice... thanks!
NastyNikolai is offline  
Old 05-05-2006, 10:16 PM
  #2  
Registered User
 
silverstunterR6's Avatar
 
Join Date: May 2004
Location: Orlando
Age: 39
Posts: 3,277
silverstunterR6 is a name known to allsilverstunterR6 is a name known to allsilverstunterR6 is a name known to allsilverstunterR6 is a name known to allsilverstunterR6 is a name known to allsilverstunterR6 is a name known to all
Re: HEY!!! help with my bike! please

Doesn't sound good
can you think of any reason why something would be broken?
silverstunterR6 is offline  
Old 05-05-2006, 11:12 PM
  #3  
Registered User
Thread Starter
 
NastyNikolai's Avatar
 
Join Date: Apr 2006
Location: Glendale, Az, USA
Age: 40
Posts: 43
NastyNikolai is an unknown quantity at this point
Re: HEY!!! help with my bike! please

umm.. well i stunt it.. not too hard, but im just starting out, so i dont really have the finesse' down yet. i do 1sst,2nd,and 3rd gear standups. and stoppies.. nothing out of the ordinary, it was actually kinda windy today, so i was layin low. i've been having some complications with my clutch lately, like the past 2-3 days, would a messed up clutch make it vibrate and sound like it does? it almost sounds internally, but at low rpm's its perrrfect. im at a loss?
NastyNikolai is offline  
Old 05-06-2006, 06:47 AM
  #4  
Registered User
Thread Starter
 
NastyNikolai's Avatar
 
Join Date: Apr 2006
Location: Glendale, Az, USA
Age: 40
Posts: 43
NastyNikolai is an unknown quantity at this point
Re: HEY!!! help with my bike! please

sorry, i just got done riding it, and when i start it up, now it idles really rough. after about 5 grand on the tach, its kinda flattens out. theres not really a knocking sound. it sounds like timing actually, with the throttle slightly open you can hear the putter. wel, when i try to stand it up in 2nd it almost sounds like a v-twin. power loss is dramatic, sounds horrible, kinda like misfiring, but when i set downand upshift to 6th it cruises fine. well, besides being a bit rougher and vibrate a little bit at low rpm's, but rough at high rpm's. what would make my bike vibrate and act up like this? come to think of it, i ride the rev limiter sometimes on long wheelies. how bad does it sound....?anyone???????? aannnyyyy ideas on what i can do tomorrow to look at it?
NastyNikolai is offline  
Old 05-06-2006, 08:30 AM
  #5  
Registered User
 
Bobby@BullyDog's Avatar
 
Join Date: Sep 2005
Location: Dallas..texxxxus
Age: 38
Posts: 641
Bobby@BullyDog is an unknown quantity at this point
Re: HEY!!! help with my bike! please

hmm..so it has lost power over 5k....super nasty idle...but will cruise just fine?
Bobby@BullyDog is offline  
Old 05-06-2006, 09:28 AM
  #6  
Registered User
 
r6nitup's Avatar
 
Join Date: Jul 2005
Location: Osceola Indiana
Age: 38
Posts: 124
r6nitup is an unknown quantity at this point
Re: HEY!!! help with my bike! please

carbs or FI,
r6nitup is offline  
Old 05-06-2006, 10:12 AM
  #7  
Registered User
 
955iDisastar's Avatar
 
Join Date: Nov 2003
Location: texas
Age: 47
Posts: 399
955iDisastar is an unknown quantity at this point
Re: HEY!!! help with my bike! please

Originally Posted by NastyNikolai
sorry, i just got done riding it, and when i start it up, now it idles really rough. after about 5 grand on the tach, its kinda flattens out. theres not really a knocking sound. it sounds like timing actually, with the throttle slightly open you can hear the putter. wel, when i try to stand it up in 2nd it almost sounds like a v-twin. power loss is dramatic, sounds horrible, kinda like misfiring, but when i set downand upshift to 6th it cruises fine. well, besides being a bit rougher and vibrate a little bit at low rpm's, but rough at high rpm's. what would make my bike vibrate and act up like this? come to think of it, i ride the rev limiter sometimes on long wheelies. how bad does it sound....?anyone???????? aannnyyyy ideas on what i can do tomorrow to look at it?
I'm right up the street from you, pm sent.
955iDisastar is offline  
Old 05-06-2006, 03:38 PM
  #8  
Registered User
Thread Starter
 
NastyNikolai's Avatar
 
Join Date: Apr 2006
Location: Glendale, Az, USA
Age: 40
Posts: 43
NastyNikolai is an unknown quantity at this point
Re: HEY!!! help with my bike! please

Fi, it feels like about 20-30% power loss when i go to do a standup, and it raps(vtwin sound) really bad! after 5 grand. it crusies almost fine, other than being rough... i know its frustrating for you guys, i apologize. im not too good at describing crappa. thanks again by the way...
NastyNikolai is offline  
Old 05-06-2006, 09:38 PM
  #9  
Registered User
 
Turboedsupe's Avatar
 
Join Date: Mar 2006
Location: Deadly Heat, Arizona
Posts: 82
Turboedsupe is an unknown quantity at this point
Re: HEY!!! help with my bike! please

Dude you had to **** something up with the motor from what tj told me you did. My guess is a bent valve or something else in there, time for the rebuild
Turboedsupe is offline  
Old 05-07-2006, 06:24 PM
  #10  
Registered User
 
r6nitup's Avatar
 
Join Date: Jul 2005
Location: Osceola Indiana
Age: 38
Posts: 124
r6nitup is an unknown quantity at this point
Re: HEY!!! help with my bike! please

mabe the timing skipped or something
r6nitup is offline  
Old 05-07-2006, 07:32 PM
  #11  
Registered User
 
Snipes20's Avatar
 
Join Date: May 2004
Location: london, Ontario
Age: 42
Posts: 649
Snipes20 is an unknown quantity at this point
Re: HEY!!! help with my bike! please

It's deffinetly something internal......It's unlikley the timing has been moved because the GSXR's have good cam chain tensioners.....If I were to guess I would say that you have floated valves in two of your cyclinders.

It's Idling rough cause the valve is bent and has no power cause the valve isn't opening enough to let your fuel in. If you have the know how get the heads off and and replace your valves and set the timing and u should be good to go
Snipes20 is offline  
Old 05-08-2006, 01:20 AM
  #12  
Registered User
Thread Starter
 
NastyNikolai's Avatar
 
Join Date: Apr 2006
Location: Glendale, Az, USA
Age: 40
Posts: 43
NastyNikolai is an unknown quantity at this point
Re: HEY!!! help with my bike! please

Originally Posted by Snipes20
It's deffinetly something internal......It's unlikley the timing has been moved because the GSXR's have good cam chain tensioners.....If I were to guess I would say that you have floated valves in two of your cyclinders.

It's Idling rough cause the valve is bent and has no power cause the valve isn't opening enough to let your fuel in. If you have the know how get the heads off and and replace your valves and set the timing and u should be good to go
sheeeiittt, thanks man..
NastyNikolai is offline  
Old 05-08-2006, 01:46 AM
  #13  
Registered User
 
Snipes20's Avatar
 
Join Date: May 2004
Location: london, Ontario
Age: 42
Posts: 649
Snipes20 is an unknown quantity at this point
Re: HEY!!! help with my bike! please

Aint no thang
Snipes20 is offline  
Old 05-08-2006, 09:54 AM
  #14  
Registered User
 
KF_Chris's Avatar
 
Join Date: Jan 2005
Location: pensacola, fl
Age: 45
Posts: 3,695
KF_Chris is a decent person
Re: HEY!!! help with my bike! please

make sure your plugs and injectors are firing good too, never know. I'd wager on the valve crap though.
KF_Chris is offline  
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
madmoto518
Newbie Welcome Center
0
10-22-2012 09:22 PM
elliotfmx
Stunting Help and Advice
0
10-11-2012 06:10 AM
elliotfmx
Newbie Welcome Center
0
10-10-2012 01:56 PM
ProStunts
Newbie Welcome Center
2
10-07-2012 08:44 AM



Quick Reply: HEY!!! help with my bike! please



All times are GMT -4. The time now is 01:10 PM.