Bike...before...
#1
Bike...before...
Hey this is my bike right now..i've got everything off of it for my bike parts comin in...I got a round 12 bar comin, stuntex pickuptube, 1 down 10 up gears, cyclops light piece,1000rr hydrolic mastercylinder, pilot powers rear tire, upperstaybracket, im ordering my clutch tonight from bikebandit..im goin with oem.my question is..what the hell do i do with the light switchies and stuff??and how would i make the stock taillight work??? with the round bar? Also. what cheapmodifications can i do..to make **** not break as easy..and yes i have a FI Cage.
Here Is My Front Piece And Side Fairings...i think im going to just run side fairings for a little while until i get consistant with my slow tricks and all that...because upper stays are pricey.
What Do I Do With The Light Switch??? its in the way of where i mount the HB
Here Is My Front Piece And Side Fairings...i think im going to just run side fairings for a little while until i get consistant with my slow tricks and all that...because upper stays are pricey.
What Do I Do With The Light Switch??? its in the way of where i mount the HB
#4
Re: Bike...before...
Originally Posted by GundamnitPete
looks sick, but it's a gixxer, so beef up that subframe
and chop the exhuast some...
and chop the exhuast some...
#5
Re: Bike...before...
Originally Posted by GundamnitPete
looks sick, but it's a gixxer, so beef up that subframe
and chop the exhuast some...
and chop the exhuast some...
#7
Re: Bike...before...
Originally Posted by va stunta
did u get the round bar from 905?
#9
Re: Bike...before...
olsen...
of course the light switch pod must be removed to allow room for your hb.
you will want to run some type of non-rigged wiring setup for your headlight.walmart sells an apc relay kit perfect for the job for $10.its worth it to not have your **** randomly cut out on you cause your wiring is unreliable,plus it will let you kill the headlight in case you have to say, run from someone.:YEAH
solder your starter switch closed so you wont accidently mousetrap or somethin if you ever have a highchair mishap.**** hits the fan when the inside of your leg hits the starter switch.
do what tony did and buy a cheapass brakelight at walmart as well.the round bars obviously wont accomodate for a factory tail light so it must be relocated. walmart carries some brakelights you can make look decent.let me buy your oem off you!~
cut your clutch/brake levers down a couple inchs.they will snag, bend, and break if you dont.
grind your front pegs down an inch or so, they will also snag, bend, and break.
i would also invest in a sprocket side swingarm spool. you swingarm will grind if you dont have one.
go to the home depot and buy some hardened steel bars for subframe reinforcement.this requires some time and thought but youll only spend $30 if you have the proper tools.check out how mine came out.
here's my bike.its very dirty.you have been warned.
of course the light switch pod must be removed to allow room for your hb.
you will want to run some type of non-rigged wiring setup for your headlight.walmart sells an apc relay kit perfect for the job for $10.its worth it to not have your **** randomly cut out on you cause your wiring is unreliable,plus it will let you kill the headlight in case you have to say, run from someone.:YEAH
solder your starter switch closed so you wont accidently mousetrap or somethin if you ever have a highchair mishap.**** hits the fan when the inside of your leg hits the starter switch.
do what tony did and buy a cheapass brakelight at walmart as well.the round bars obviously wont accomodate for a factory tail light so it must be relocated. walmart carries some brakelights you can make look decent.let me buy your oem off you!~
cut your clutch/brake levers down a couple inchs.they will snag, bend, and break if you dont.
grind your front pegs down an inch or so, they will also snag, bend, and break.
i would also invest in a sprocket side swingarm spool. you swingarm will grind if you dont have one.
go to the home depot and buy some hardened steel bars for subframe reinforcement.this requires some time and thought but youll only spend $30 if you have the proper tools.check out how mine came out.
here's my bike.its very dirty.you have been warned.
#10
Re: Bike...before...
haha ima try and make something work and still look ok ...and yall are gunn ahave to help me with som eof this..sodering and ****..i never messed with any of that!! and this is staples huh? yo udidnt return the phone call why not?
#15
Registered User
Join Date: Nov 2004
Location: Baltimore, MD
Age: 42
Posts: 685
Re: Bike...before...
[QUOTE=jsteezy]olsen...
of course the light switch pod must be removed to allow room for your hb.
NOT TRUE!!! YOU dont even have a hand break on you sh*t by the looks of the pictures.
YELLOWGSXR.... if you want to keep you swiitch up there, slide you grip down over you bar end, just enough to have room for the hand break and the switch houseing. Put the hand break up as far as you can on the clipon and the clutch pearch right aginst that and everything WILL fit. You may have to buy a new grip to do this cause yours is probably glued fast fromt eh factory.
P.s Jsteezy.... that cage is gonna break you subframe !! get the new style
of course the light switch pod must be removed to allow room for your hb.
NOT TRUE!!! YOU dont even have a hand break on you sh*t by the looks of the pictures.
YELLOWGSXR.... if you want to keep you swiitch up there, slide you grip down over you bar end, just enough to have room for the hand break and the switch houseing. Put the hand break up as far as you can on the clipon and the clutch pearch right aginst that and everything WILL fit. You may have to buy a new grip to do this cause yours is probably glued fast fromt eh factory.
P.s Jsteezy.... that cage is gonna break you subframe !! get the new style
#17
Re: Bike...before...
Originally Posted by Wheeliest
good luck running a comfortable set up HB with stock clutch lever,
#18
Re: Bike...before...
[QUOTE=shortGSXR1000] hey short...do you still think i cant do anything because ima newbie?? ask jsteezy. he hasnt seen me ride lately ..but i think scott and them told him what i can do now!
Originally Posted by jsteezy
olsen...
of course the light switch pod must be removed to allow room for your hb.
NOT TRUE!!! YOU dont even have a hand break on you sh*t by the looks of the pictures.
YELLOWGSXR.... if you want to keep you swiitch up there, slide you grip down over you bar end, just enough to have room for the hand break and the switch houseing. Put the hand break up as far as you can on the clipon and the clutch pearch right aginst that and everything WILL fit. You may have to buy a new grip to do this cause yours is probably glued fast fromt eh factory.
P.s Jsteezy.... that cage is gonna break you subframe !! get the new style
of course the light switch pod must be removed to allow room for your hb.
NOT TRUE!!! YOU dont even have a hand break on you sh*t by the looks of the pictures.
YELLOWGSXR.... if you want to keep you swiitch up there, slide you grip down over you bar end, just enough to have room for the hand break and the switch houseing. Put the hand break up as far as you can on the clipon and the clutch pearch right aginst that and everything WILL fit. You may have to buy a new grip to do this cause yours is probably glued fast fromt eh factory.
P.s Jsteezy.... that cage is gonna break you subframe !! get the new style
#20
Re: Bike...before...
Originally Posted by Wheeliest
i mean like, having the clutch in a spot and the hand brake in a spot, radial mounts do not play well with stock clutch pearch n ****