f4i help...still
#1
f4i help...still
my f4i has been down for like 3 weeks now,its not priming the FI and i dont know why,YES the ****ing tip over is jumped,YES the kill switch is fine,i can tell because when i disconnect them i can hear the relays click..NOW i bought a NEW wiring harness,CDI,rectifier,and relays now the FI still wont prime everything that i can see is hooked up fine and the wiring harness is in great shape..when i hook power directly to the fuel pump it comes on and it pumps gas out... i test lighted the 3 prongs on the wiring harness that the fuel pump plugs into the far left prong has a good ground,the other two are dead...what else is left on an f4i that would be broken or disconnected that would keep the fuel pump dead like it is?????
Last edited by DoodleF4i; 04-18-2006 at 05:57 PM.
#4
Re: f4i help...still
check ur fuses idiot...ur starting fuse in that lil black box under ur seat, then attached to that box is a lil clear one with a 20watt fuse in it, check that...then a lil further down towards the tank is like a red cap, pull that off and theres a 30watt fuse under it....i guarentee u one of them is blown
#5
Re: f4i help...still
sounds like you already checked all the basic shiat id have to get my hands on it to diagnose it but ya if you run a hot wire to it off the ignition it should work fine, i hear you though i like my shiat right too
#7
Re: f4i help...still
sounds like your having the same problem as baker is man. his **** died on sunday.
he is tryin a new wiring harness. hey if you fix your before him tell him the probelm and if he gets his **** done first ill let you know
he is tryin a new wiring harness. hey if you fix your before him tell him the probelm and if he gets his **** done first ill let you know
#11
Re: f4i help...still
ALL fuses are good,ive tryed both the igntions i have,ive tryed both my kill switch pods,ive jumped the kill switch directly at the connecter,its got all new relays,new cdi,new rectifter,new wiring harness and still nothing..ive done all the basic **** and WAY more...something is wrong but i dont know what else is on an f4i that i havent already checked or replaced that would keep my fuel pump from getting power.
#13
Re: f4i help...still
I'd just go through the troubleshooting section on the servicebook.Everything should be checked with a multimeter, just cause it clicked doesnt mean that parts are still good. Trial and error sucks, way to expensive to go that route.
Hope you get it fixed man.
Hope you get it fixed man.
#15
Re: f4i help...still
this is what honda manual says
No Spark------
Faulty spark plug
Fouled Spark Plug
Faulty ECM
Broken or Shorten spark plug wire
Faulty Ignition Switch
Faulty Ignition Pulse Generator
Faulty Engine Stop Switch
Loose or dissconnected Ignition system wires
No Spark------
Faulty spark plug
Fouled Spark Plug
Faulty ECM
Broken or Shorten spark plug wire
Faulty Ignition Switch
Faulty Ignition Pulse Generator
Faulty Engine Stop Switch
Loose or dissconnected Ignition system wires
#16
Re: f4i help...still
i test lighted the plug harness and each one has power but its not sparking..one other thing i saw the wire coming out of the stator cover the middle prong is burnt and melted a little bit.. and no power comes out of any of those prongs when i crank the motor..should it?