636 Tank Dent
#2
Re: 636 Tank Dent
Ummm i'm at work. I'll post a pic later.. I used a deadblow hammer..Has rubber hammer part with sand in it.. Just make sure you pay attention to how far the center goes down....I start at the gas cap and worked my way out and around.. I'll get a pic up
#6
Re: 636 Tank Dent
Originally Posted by RuffRyder99
Rubber mallet and my foot worked good for me........started with the back and worked around......heres a few pics, im in the process of painting it now
what up man...im in Louisville Ky. and looking for other stunters...where ya located?
#9
I Enjoy Posting At StuntLife!
Thread Starter
Join Date: Dec 2003
Location: Dallas,TX
Age: 44
Posts: 3,519
Re: 636 Tank Dent
Originally Posted by WADESEC518
here are some pics of my teamate joes tank. mine will look exactly like this one soon!
#10
Re: 636 Tank Dent
Originally Posted by WADESEC518
here are some pics of my teamate joes tank. mine will look exactly like this one soon!
Is that a cut,flip weld,or Bondo,cuz that **** is clean,damn good job.
I will post a pic of mine when PhotoBULLSHIT comes back online.......
#11
Re: 636 Tank Dent
Originally Posted by WADESEC518
here are some pics of my teamate joes tank. mine will look exactly like this one soon!
#13
Re: 636 Tank Dent
its not cut. it was dented in starting around the gas cap and working outward with a plastic hammer. surprisingly very little bondo was used due to the awesome dent job! then paint and clear and thats what you get when you take your time and do it right. its like sitting on a toilet seat, comfortable as f*ck!
#14
Guest
Posts: n/a
Re: 636 Tank Dent
Originally Posted by Turtle
i'll post pics when i get mine back from woo...thats how i got mine dented....mo****er does a nasty tank dent
#15
Re: 636 Tank Dent
Originally Posted by louisvillerider
what up man...im in Louisville Ky. and looking for other stunters...where ya located?
Im up here in Florence, like 10 mins south of Cincy...
#16
Re: 636 Tank Dent
Originally Posted by Kelm
Really? Does he charge money? Maybe he'll dent mine for me when he comes up i'm about to paint my bike but I really want my tank dented in.
#17
Re: 636 Tank Dent
Mine isn't from a 636, and looks like **** but I thought, I just post it up It had gas leeks all over the place, but that's welded and after alot of trouble the tank is okay now I'm scared to dent in tanks in the future, I probably will **** it up again
#20
I Enjoy Posting At StuntLife!
Thread Starter
Join Date: Dec 2003
Location: Dallas,TX
Age: 44
Posts: 3,519
Re: 636 Tank Dent
Originally Posted by john LegionST
im sure that me and woo and 540 will be able to help ya out next weekend
-Alvin