f4i with 929 forks?
#1
f4i with 929 forks?
i love my 929 for stoppies but i just picked up a f4i. would it be a good idea to put the 929 forks on the f4i or how about the whole front end. what parts should i put on if i want to the forks and front end on. thanks plz i need alot of advice
#2
I Enjoy Posting At StuntLife!
Join Date: Oct 2003
Location: BACK IN THE KCMO!!!!
Age: 37
Posts: 1,935
Re: f4i with 929 forks?
whole front end......... clip ons, forks, triples, bearings, wheel, rotors......
there should be tonssssssssssssssssssssssssssss of posts about this if you use the search function and it works properly like back in the day.... ( i hear it is actin funny lately......)
there should be tonssssssssssssssssssssssssssss of posts about this if you use the search function and it works properly like back in the day.... ( i hear it is actin funny lately......)
#3
Re: f4i with 929 forks?
+1....It will make the f4i a completely different bike. The bars will hit the upper fairing stay, which is the only downfall I have found so far....otherwise..it is mint.
#4
Re: f4i with 929 forks?
Some People Rotate The Clip-ons Out More So They Wont Hit But Other Than That They Are Great.......................i Have Them On My F4i But With Mx Bars On It......................good Luck
#5
I Enjoy Posting At StuntLife!
Join Date: Feb 2004
Location: Valdosta, GA www.HoHeydesigns.com
Age: 50
Posts: 1,626
Re: f4i with 929 forks?
Hey guys I also am going to be swapping everything from a 929 to my F4i so how about bearings and hardware? Do you just use all of the hardware from the 929 meaning washer’s nuts and of course bearings?
#8
Re: f4i with 929 forks?
Originally Posted by OLIVER
before you put the 929 front end on make sure you change the neck bairings
#10
Re: f4i with 929 forks?
yup like everyone said before use all the 929 stuff, and while u have it apart u might as well put nebearings and races in the neck....also i wud suggest using the f4i front brake master cylinder cus when u wreck the 929 one breaks easily...so take it off and use the 929 master for a hb
#11
Re: f4i with 929 forks?
i put the clip ons on top of the tripple, you dont have to but it feels better to me a lil higher you jus got to lower the front of the bike about a inch i never had any problems
#12
I Enjoy Posting At StuntLife!
Join Date: Oct 2003
Location: BACK IN THE KCMO!!!!
Age: 37
Posts: 1,935
Re: f4i with 929 forks?
rotating the clipons out is just going to make them hit more.....
those flimsy AL fairing stays snap like pretzels, so fab up a steel on, that pushes the upper forward a bit.... this is what i did, and my clipons dont hit the fairing at all......
those flimsy AL fairing stays snap like pretzels, so fab up a steel on, that pushes the upper forward a bit.... this is what i did, and my clipons dont hit the fairing at all......
#13
Re: f4i with 929 forks?
Originally Posted by Z-UNIT
yup like everyone said before use all the 929 stuff, and while u have it apart u might as well put nebearings and races in the neck....also i wud suggest using the f4i front brake master cylinder cus when u wreck the 929 one breaks easily...so take it off and use the 929 master for a hb
good point man, the f4i will take a beating, but in the long run the 929/954 master is stronger and will be better for endos. , i run the f4i master and can still roll them good distance. so whatever makes u happy. but it does suck replacing the litte plastic elbos in the 954 master. And as for the clipons, i say leave them alone. I had absolutely no problems with my upper and the clipons. I just had to remove the air ducts
#14
Re: f4i with 929 forks?
easy swap to do, i would just buy the whole front end though..., 929 front end bolts directly on, but the 954s came with tapered bearings as opposed to the regular bearings that come on 929s and f4is (making them completly enter-changable) as long as it has the correct races its easilly done
#15
Re: f4i with 929 forks?
Originally Posted by O-TownHoNdA
easy swap to do, i would just buy the whole front end though..., 929 front end bolts directly on, but the 954s came with tapered bearings as opposed to the regular bearings that come on 929s and f4is (making them completly enter-changable) as long as it has the correct races its easilly done
#16
I Enjoy Posting At StuntLife!
Join Date: Feb 2004
Location: Valdosta, GA www.HoHeydesigns.com
Age: 50
Posts: 1,626
Re: f4i with 929 forks?
Okay so when it comes to the bearings if you have the 929 set up your good easy no need to worry about changing bearings or races. Now if you have 954 set up your going to have to change out the races because the 954 uses sealed style bearings instead of the *****. My question for you guys now is where do I go to buy the new races for the 954 style sealed bearings and is it hard to remove and reinstall both top & bottom races?
#17
Re: f4i with 929 forks?
Originally Posted by Ho_Hey
Okay so when it comes to the bearings if you have the 929 set up your good easy no need to worry about changing bearings or races. Now if you have 954 set up your going to have to change out the races because the 954 uses sealed style bearings instead of the *****. My question for you guys now is where do I go to buy the new races for the 954 style sealed bearings and is it hard to remove and reinstall both top & bottom races?
#18
I Enjoy Posting At StuntLife!
Join Date: Feb 2004
Location: Valdosta, GA www.HoHeydesigns.com
Age: 50
Posts: 1,626
Re: f4i with 929 forks?
Okay so if I go to a Honda dealer and buy the 954 top and bottom races NEW I should be able to swap those out with the ones in my F4i pretty easy? I just want so make sure someone has done this and hasn’t screwed anything up trying. I thought you had to have special tools to remove and replace races?
#19
I Enjoy Posting At StuntLife!
Join Date: Feb 2004
Location: Valdosta, GA www.HoHeydesigns.com
Age: 50
Posts: 1,626
Re: f4i with 929 forks?
Okay so if I go to a Honda dealer and buy the 954 top and bottom races NEW I should be able to swap those out with the ones in my F4i pretty easy? I just want so make sure someone has done this and hasn’t screwed anything up trying. I thought you had to have special tools to remove and replace races?
I would also like to ask are the 954 roller/ barrel type bearings really worth going through the hassle of changing out your F4i racers to the 954 racers so that you can have those roller/ barrel type bearings on your bike? If its makes a noticeable difference I am down to changing the racers on my F4i to work with the 954 roller/ barrel type bearings
I would also like to ask are the 954 roller/ barrel type bearings really worth going through the hassle of changing out your F4i racers to the 954 racers so that you can have those roller/ barrel type bearings on your bike? If its makes a noticeable difference I am down to changing the racers on my F4i to work with the 954 roller/ barrel type bearings