f4i tip senser and headlight
#1
f4i tip senser and headlight
ok, so we bi-passed the tip senser, she started right up, but my headlights wouldnt go on, and it said on the dash that the high beams were up.
also, my leftr blinker stayd onbother, yaknow...blinking tho... just stayd on, i had the blinkers set up 2 wiar, so that there not on all the time, just when there blinking. so yeah, thats weard... how do i get the tip senser bipassed, and still have use of my headlight... how did you guys pull this one off...
thanks,
~.K
also, my leftr blinker stayd onbother, yaknow...blinking tho... just stayd on, i had the blinkers set up 2 wiar, so that there not on all the time, just when there blinking. so yeah, thats weard... how do i get the tip senser bipassed, and still have use of my headlight... how did you guys pull this one off...
thanks,
~.K
#2
Re: f4i tip senser and headlight
Originally Posted by keebler
ok, so we bi-passed the tip senser, she started right up, but my headlights wouldnt go on, and it said on the dash that the high beams were up.
also, my leftr blinker stayd onbother, yaknow...blinking tho... just stayd on, i had the blinkers set up 2 wiar, so that there not on all the time, just when there blinking. so yeah, thats weard... how do i get the tip senser bipassed, and still have use of my headlight... how did you guys pull this one off...
thanks,
~.K
also, my leftr blinker stayd onbother, yaknow...blinking tho... just stayd on, i had the blinkers set up 2 wiar, so that there not on all the time, just when there blinking. so yeah, thats weard... how do i get the tip senser bipassed, and still have use of my headlight... how did you guys pull this one off...
thanks,
~.K
#3
I Enjoy Posting At StuntLife!
Join Date: Oct 2003
Location: BACK IN THE KCMO!!!!
Age: 37
Posts: 1,935
Re: f4i tip senser and headlight
if you jump the tipover switch at the main harness one the bike (before the connection) it wont let the headlights work................ just do it at the actual box.......
#6
Re: f4i tip senser and headlight
Originally Posted by sbc967
it the black box mounted on the back of the headlight, on the left side. its about 2" x 2" in size. has three wires.
#9
Re: f4i tip senser and headlight
Originally Posted by keebler
ok,
so i cut and connect, after i cut, do i connect the wiars running back to the bike, or the wiars running in to the box?
so i cut and connect, after i cut, do i connect the wiars running back to the bike, or the wiars running in to the box?
1. Cut the three wires going into the box.
2. throw the box away.
3. connect the RED and GREEN wires.
4. Tape off the WHITE wire. (you don't need it)
#10
Re: f4i tip senser and headlight
if u don't like the sound of cutting wires follow these steps
1. locate box (Bank Angle Sensor A.K.A "Tip Switch")
2. Follow the three wires off of it to the harness/plug
3. Unconnect harness/plug
4. Take a piece of paper clip in the shap of a horse shoe and mash it into the harness/plug (which u can only do it one way which is female side of the harness/plug)
5. make sure u looped the outer wires "RED" - "GREEN"
6. Tape it off so u don't short it
7. replace tools to exact spots found (or reorganize em)
8. Wash hands with go joe
9. Make a turkey sandwich and take a nap
10. Go whoolie..
1. locate box (Bank Angle Sensor A.K.A "Tip Switch")
2. Follow the three wires off of it to the harness/plug
3. Unconnect harness/plug
4. Take a piece of paper clip in the shap of a horse shoe and mash it into the harness/plug (which u can only do it one way which is female side of the harness/plug)
5. make sure u looped the outer wires "RED" - "GREEN"
6. Tape it off so u don't short it
7. replace tools to exact spots found (or reorganize em)
8. Wash hands with go joe
9. Make a turkey sandwich and take a nap
10. Go whoolie..
#11
Re: f4i tip senser and headlight
Originally Posted by MasterShake
if u don't like the sound of cutting wires follow these steps
1. locate box (Bank Angle Sensor A.K.A "Tip Switch")
2. Follow the three wires off of it to the harness/plug
3. Unconnect harness/plug
4. Take a piece of paper clip in the shap of a horse shoe and mash it into the harness/plug (which u can only do it one way which is female side of the harness/plug)
5. make sure u looped the outer wires "RED" - "GREEN"
6. Tape it off so u don't short it
7. replace tools to exact spots found (or reorganize em)
8. Wash hands with go joe
9. Make a turkey sandwich and take a nap
10. Go whoolie..
1. locate box (Bank Angle Sensor A.K.A "Tip Switch")
2. Follow the three wires off of it to the harness/plug
3. Unconnect harness/plug
4. Take a piece of paper clip in the shap of a horse shoe and mash it into the harness/plug (which u can only do it one way which is female side of the harness/plug)
5. make sure u looped the outer wires "RED" - "GREEN"
6. Tape it off so u don't short it
7. replace tools to exact spots found (or reorganize em)
8. Wash hands with go joe
9. Make a turkey sandwich and take a nap
10. Go whoolie..
Thread
Thread Starter
Forum
Replies
Last Post
eamonhoffman
Service, Repair, and Maintenance
0
10-14-2012 07:51 PM