wtf is a ect sensor?
#61
Re: wtf is a ect sensor?
Originally Posted by crtchrktrcr
fvck... it was the last thing i had to tighten, then i was going to put the frame back on.. god damnit... it's a tiny bolt too... going to be difficult... hmmm, zipties, that'll do it
GOT ZIPTIES?
FSP TORONTO????
#63
Re: wtf is a ect sensor?
Originally Posted by crtchrktrcr
no zipties, but i got FSP!!!
Fatkids <3 Snack Packs!
Fatkids <3 Snack Packs!
so have u fixed that piece yet? when was that last posted ummm last night. You need to get that thing fixed. Z-UNit needs something to ride when he comes there. My bike has been off limits, except to mikey d and kendall. I keep forgetting to check for those dates.
FSPtony signing out
#64
#66
Re: wtf is a ect sensor?
no it can't be plugged in wrong.. it has that plastic snap on it.. it clicks into place... i found t he problem.. didn't align the crank gear correctly, i put it on the dots, not the T, about 1/4 inch off..
#67
Re: wtf is a ect sensor?
now that I re read..... that isnt a 7... its a 34... which is the servo motor...
lemme guess.. its unplugged?? when you remove the servo motor you will always have a 34 blink.. you have to plug the motor back in and clear that blink.. then see what the other blink is
I know a little something about 929's electrical... so plug it back in a post back up with the new blinks
lemme guess.. its unplugged?? when you remove the servo motor you will always have a 34 blink.. you have to plug the motor back in and clear that blink.. then see what the other blink is
I know a little something about 929's electrical... so plug it back in a post back up with the new blinks
#68
Re: wtf is a ect sensor?
Originally Posted by crtchrktrcr
no it can't be plugged in wrong.. it has that plastic snap on it.. it clicks into place... i found t he problem.. didn't align the crank gear correctly, i put it on the dots, not the T, about 1/4 inch off..
ROOKIE maybe u should try that MMI school. i hear it's real good
eff ess pee
#70
Re: wtf is a ect sensor?
that makes sense thomas... how it was 3 slow n 4 fast, makes a 34... ****, wish someone told me that earlier! i had to fix the timing anyway... i called dustin apgar, he's real good with 929's too.. he said timing.. but i'll let u know by thursday what it says
Thread
Thread Starter
Forum
Replies
Last Post