420gixxer

this bastard was a little off the whole time well the front left bolt came loose last night,so I figure I will put these sprockets on,and guess what the left side bolt will not start.GRRRRRRRRRRRRRRRRRR


correction it will bolt without any of the washers behind it,WTF gives,there should be 7 washers behind the cage in front of the frame,if I dont put any in it it will thread right up????!!!!!

FHL

I can't tell what you're saying but do you have the sliders off cuz you have to have something to hold the bolt in place or it won't thread.

420gixxer

yeah the sliders are off,if they are in there is no way to thread the bolt.....
anyway
When I first got the cage a week or so ago the left side bolt nevber really seemed right to me,it didnt seem to thread very well but it was tight,well the bolt eventually came loose.SO I decided to put on this 66 tooth sprocket I have.
I get the sprockets on and I am trying to get the cage back on but the left side front mount will not thread with the washers on it,without washers it bolts right up......

FHL

Get a longer bolt?

420gixxer

its not that it is not long enough....it just will not thread with the washers on?!?!?!

HurricaneF2

its in a bind, you might have to loosen all your bolts and move the motor around with a prybar or whatever. get all the bolts in before you tighten any of them. had the same problem on my r6, bolt came out and the motor kinda shifted over.

420gixxer

yeah all the other bolts were started,I got it, I used a piece of 3/8 black iron cut to the same thickness as the washers.worked like a charm....but I will probably use your suggestion hurrincane,thanks guys

SIC Nate

What does puttin a 66 tooth rear sprocket on have to do with a cage? You dont have to remove your cage to chang the back sprocket.

420gixxer

I changed the front also.................and the bolt loosened up on me about 1 hour into riding with it on..

HurricaneF2

put lockwashers on the bolts and use an impact wrench, they wont come loose again

GundamnitPete

+1!!!!!!!!!!!!!!