BrynBaily

Would anyone know if my 2000 GSXR750 wheels would fit on my new 05' GSXR750 and visa versa? I have a mint set of chrome wheels for the 00' and if they'd fit the 05' that would be great lol
Also will the rear rotors interchange with eachother? My 00' rear rotor is cooked and actually has small stress cracks where the holes are drilled! All I've seen on the bay are for 04'/05'.. so if the wheels and rotors both will interchange I'll be in buisness! :YEAH
This 00' 750 is becoming my stunt piece replacing my 929 and I've noticed just riding the streets on the GSXR the brakes are junk compaired to the honda's is there any way to firm up the pedel and keep them from fading out so quickly? I've already tried different compounds of pads, flushed the entire system twice and am running a braded line....help!

Lb3

unless the wheels changed from 04, they will work. The front rotors are different but the back rotor will bolt up.

mofat01

Rear rims should interchange. Just when you put the 00 wheels onto the 04 use the spacers from the 00.

BrynBaily

So basically everything will interchange as long as I use the spacers that came with that wheel and the rear rotor will interchange but the fronts will not....which means if I'm using the 00' front wheel I will also have to use the 00' rotors correct? thanks guys

JohnnyP

Front is the same but your 05 750 requires you to use the 05 rotors because their 298mm and the 02 down rotors are 320mm. So you can use the 00 front rim but you must use your 05 rotors on them, unless you use spacers on the fork legs for the radial calipers. I put a 04 front end on my friends bike with an 02 wheel and rotors, but I had spacers made for the bigger rotors to fit.

The rear is the same Im almost 100% I've looked at them side by side but havent tried installing one yet, But I figure if they didnt change the front why would they change the rear.

John LegionST

bryn - you can use both wheels

use the '05 spacers in the rear

use the '05 rotors up front, all will be minty!

BrynBaily

John and John....thanks guys that was exactly what I wanted to hear! Save me a bit of time and frustration too..