ZX6R_joshpete

i just put a f.i. cage on my bike and i had to relocate the coolant overflow, but it looks kinda hack and it pisses antifreeze when im on the back wheel unless there is very little coolant in the overflow. r there any companies that u guys know of that make an aftermakrket one or a better way to relocate it? my bike is a 02 zx6r

Regstunts

You can put the bottle under the gas tank. Zip tie it in place and make sure it sits up-right (the way it was in its original location) It doesn't look like theres room, but there is. Same deal '96 I had.

minytrker

i moved mine all the way to the front of the bike where the gauges used to be when i had my 01 zx6r

Kyle_PBZ

https://www.stuntlife.com/forums/sho...d.php?t=126856 Same as I told this guy.

Regstunts

That was Aaron's (racing905) idea too. Sounded like quite the project and I was in a rush so I stuck it under the tank. Just make sure it stays upright and your fine.

It is a good idea, would be worth the work if you've got the time.

bill parr

get a 1 liter bottle and one of those caps off a bottle of gear lube, you know the tapered ones. they screw right on, then clamp the over flow hose to it, thats what i did when i had my 99zx6r, worked fine, put it in the upper where the air damns used to be

Kyle_PBZ

Problem with that is that all you end up with is a overflow. Once it gets hot and fills up it just starts spewiing out. You need a resivoir so that it fills the radiator back up when it cools off.

bill parr

actually as long as you have a good seal and your fan on a toggle, it works just like an over flow, when the motor cools down it sucks the fluid back in. mine never leaked. maybe i was lucky, but it was like that for 6 months...