03silvers

I highsided and cracked my case cover...only problem is i also cracked a piece of aluminum that the case bolts onto (i assume the acutall engine block itself).

I of course jb welded the little piece back on,....question is, where the stator is housed what kinda pressure from oil is in there...im worried the jb weld wont hold and i cant afford a new motor....thanks

Quicksta da RR

IT SHOULD HOLD, IF IT DOES NOT, HAVE SOMEONE THAT CAN ALUMINUM WELD PUT THE METAL PIECE BACK ON. GOOD LUCK W/ GETTING THAT JB WELD OFF THOUGH IF YOU HAVE TO GET IT WELDED JUST MY :YEAH :YEAH

slateROK

i know guys that have had it jbwelded and it leaked all the time ... so if it doesn't bother you that it leaks then it if fine if not get it welded...

Paw Paw

mine broke out a piece where the cases meet. You cant get it welded without splitting the cases. I wound up getting another motor. ....But good luck on yours!

Paw Paw

JPFREESTYLE

Had that happen had to get a new motor. Don,t trust that JB weld unless you let it sit for awhile. Get a cage it's less expensive than buying a new motor.

jdridin

Thats notorious on the 929s. It happened on mine and I had someone reweld the piece back on. Be smart and run a cage.

Lata Justin

ABuddha20

that happened on mine also and i got it welded. But it still leaked and i noticed that gold bolt wasnt flush wit the case, could the oil be gettin in there and leaking? well i jB welded it about 1 week ago so im lettin it sit, i havent put oil in it either yet well could that be where the oil went thru and got out? dont see any other leaks

03silvers

damn...i would run a cage but i really dont stunt...i hit turns more than anything so a cage wont work....i really am not looking forward to buying a motor...ahh i guess ill see if it holds

jdridin

Get an MXD race cage. I hear they work really well if you still like to hit corners. I think TEACH uses one on his 636 track bike sometimes.

Lata Justin

Bob McAvoy

Best course of action would be welding the case cover
I've done 20 or up here in the northeast and not one has leaked
JB Weld will break down over time and you don't want to be hugging a corner and have motor oil dripping on the ground could spell out disaster

crtchrktrcr

hopefully a weld will hold, depends if u still have the cracked piece and how bad it is... i just bought a 929, and want a cage, does ANYONE have pics of an mxd or 905 cage on a 929