look
02-14-2005, 05:46 PM
#1
Registered User
Thread Starter
Join Date: Aug 2004
Location: wherever willie is
Age: 36
Posts: 6,124
look
im tryin to order my brake line for my dual caliper hb set up. i got another f4i rear caliper and a 954 frontmaster cylinder. im order 70inches of stainless steal flexable line, but dont kno wat fittings i need at each end. the guy on the fone says he needs the diameter of the bolts. anyone kno this. i am goinng to order it from this site if that helps.
http://www.bonacoinc.com/brake_lines_main.htm
http://www.bonacoinc.com/brake_lines_main.htm
02-14-2005, 07:14 PM
#2
I Enjoy Posting At StuntLife!
Join Date: Oct 2004
Location: maui hawaii
Age: 47
Posts: 1,513
Re: look
10mm x 22mm thread pitch should be 1.25. and it should be the same for both the caliper and the master. yamaha and kawasaki should also have the same size banjo bolts. you can try and steal a banjo bolt from catch's bike to see if it would work.
02-14-2005, 07:58 PM
#3
Registered User
Thread Starter
Join Date: Aug 2004
Location: wherever willie is
Age: 36
Posts: 6,124
Re: look
i have both banjo bolts a stock one for the mc and a stock one for the rear caliper. so wat do i tell the guy i need a 70 in brake line with the topp fitting at 10mm and the bottom fitting for 22 mm??? i feel retarded. also is this the site uve ordered from or is there one that caters to stunters and i wont hafta explain my self they will ahve sum clue
02-14-2005, 11:00 PM
#7
I Enjoy Posting At StuntLife!
Join Date: Nov 2003
Location: I-35
Age: 43
Posts: 4,357
Re: look
The manual should help. but Check it.. you are using all Nissin components. The rear caliper is nissin, the front master is nissin, tell the **** at the shop to stop being a jabronie and help you out on this ish!!
Get 4 Crush washers!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You need brand new crush washers!!!!! Everyone forgets this stuff, and then they have leaky lines.
Banjo bolt / crush washer / brakeline / crush washer / master
Banjo bolt / crush washer / brakeline / crush washer / caliper
Bleed from the banjo, dont over tighten, use lock-tite.
Get 4 Crush washers!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You need brand new crush washers!!!!! Everyone forgets this stuff, and then they have leaky lines.
Banjo bolt / crush washer / brakeline / crush washer / master
Banjo bolt / crush washer / brakeline / crush washer / caliper
Bleed from the banjo, dont over tighten, use lock-tite.
02-15-2005, 11:45 PM
#9
Registered User
Join Date: Jan 2004
Location: Boston, MA
Age: 36
Posts: 1,430
Re: look
Originally Posted by truckk
rick's in nh. make lines up just tell them what parts you have and they can make u 1 up in a few days they are like an hour away!
02-16-2005, 12:14 AM
#10
Registered User
Join Date: Nov 2004
Location: DFDub, texas
Age: 35
Posts: 1,057
Re: look
Originally Posted by Mike_3SicK6
Get 4 Crush washers!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! You need brand new crush washers!!!!! Everyone forgets this stuff, and then they have leaky lines.
Banjo bolt / crush washer / brakeline / crush washer / master
Banjo bolt / crush washer / brakeline / crush washer / caliper
Bleed from the banjo, dont over tighten, use lock-tite.
Banjo bolt / crush washer / brakeline / crush washer / master
Banjo bolt / crush washer / brakeline / crush washer / caliper
Bleed from the banjo, dont over tighten, use lock-tite.
very good advice, deff. take it
