MR. RYAN SMITH

Is A 954 Motor Compatible With The 929 Frame? Im Pretty Sure It Is Just A Bigger Bore Motor But I Need To Know For-sure That It Bolts Right Up. Thanx.

Miltown

bolts right in, check out my site for a write up on the changes, and parts needed.

MR. RYAN SMITH

Thanx, What Is The Name Of Your Site? Holla Back, Im Trying To Get This Thing Done.

MR. RYAN SMITH

Ok, Ive Got The Site. How Do I Get To The Modifications Pictures?

catach42

http://www.miltownwheelieboyz.com/guide.htm

MR. RYAN SMITH

So I Cannot Just Bolt The 954 Motor And Swingarm Into The 929 Frame And Use The 929 Wiring Harness, And Throttle Bodies? I Dont Really Care About The Gauge Mounts And The Switches. Message Back If I Can Get By With Just The 954 Motor And Swingarm And 929 Everything Else. Thanx.

Miltown

not sure, when i bought my 954rr motor it came with everything else, I orginally got the idea from someone else that completed the swap.

I would think that you are going to need the 954 airbox, and everything else to make it run right.

MR. RYAN SMITH

Wanted: Throttle Bodies, Air Box, Wiring Harness And Ecm

Kyle_PBZ

You don't need all that stuff. Just use the 929 throttle bodies. It will run great. Only other thing you have to change is the radiator hoses. One of them is a bit diffrent on the bypass part and you have to use the original off of your bike. We've swapped both ways on 4 different bikes now and no problems. 929 motor will run just a tad rich in a 954 bike, but it's no biggie.

Miltown

Looks like you dont need it, but if you choose to get all of it then i have the 954rr

wire harness
ecu
airbox
radiator

for 120.00 shipped

pm if interested

jesse

MR. RYAN SMITH

YOUR FULL OF SH#T.

SAMBO

Damn yo....send a bill to Kyle for $5,000 for a new motor, mental anguish and therapy.

atnuts

explain I might be doing the same swap

SAMBO

motor blew because he was advised to use 929 ecm/throttle bodies etc. on the 954 motor.

Lb3

the ignition timing is different between the two.

Miltown

if your going to do the swap then you should do it right, instead of half rigging it.

DoodleF4i

or just replace the 929 motor and be done...the 929 still rocks.

atnuts

I'm putting a 929 into a 954( reason: I got one for cheap) what can I keep on the 954 to work with the 929 motor? and it still won't blow up

MR. RYAN SMITH

IF YOU USE A 929 MOTOR, THEN YOU NEED THE 929 THROTTLE BODIES, ECM, AND WIRING HARNESS. I SHOULD HAVE TAKEN MY TIME AND DONE IT RIGHT BUT I HAD A 954 MOTOR AND I WANTED TO RIDE. THIS SITE IS FULL OF " THINK THEY KNOW SOME SH#T MOTHER F#CKERS." I HAVE THE PARTS YOU NEED FOR THE 929 IF YOU WANT TO TRADE FOR THE 954 STUFF.