how to air box mod f4i
#81
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: how to air box mod f4i
i would leave it plugged in so the computer thinks it's still working but i have read that people have done it both ways....
i would start with the second cable all the way out so you can set your idle at 1000 rpm with the stock cable then turn your idle up to where you like it with the second cable and then try turning the first cable up a little bit at a time to see where it pulls best because the first cable adjust the air fuel mixture and it will effect how strong your idle pulls......
i would start with the second cable all the way out so you can set your idle at 1000 rpm with the stock cable then turn your idle up to where you like it with the second cable and then try turning the first cable up a little bit at a time to see where it pulls best because the first cable adjust the air fuel mixture and it will effect how strong your idle pulls......
#82
Re: how to air box mod f4i
What?
#83
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#85
Re: how to air box mod f4i
I adjust that **** everytime I get on my bike. You know better than that.
#86
Re: how to air box mod f4i
just came back from the spot.
HOLY ******* DIFFERENCE...first, didn't touch the stock idle...didn't notice much difference...but then i took turned up the stock 2-3 turns....holy **** i love it!:YEAHthx guyz
offtopic but almost looped a ss, my awesome hb saved me at the last second. its hella
HOLY ******* DIFFERENCE...first, didn't touch the stock idle...didn't notice much difference...but then i took turned up the stock 2-3 turns....holy **** i love it!:YEAHthx guyz
offtopic but almost looped a ss, my awesome hb saved me at the last second. its hella
#89
#92
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#94
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: how to air box mod f4i
i know some f4i's run better on the street with it blocked off but i also know a bunch that don't so i think you should try it and see what works for your bike
#97
Re: how to air box mod f4i
i know some f4i's run better on the street with it blocked off but i also know a bunch that don't so i think you should try it and see what works for your bike[/quote]
the only mod i heard before this one was to tape off one side of the airbox to help out the low end, but i'll def. do this mod and try it with/without taping off one side like old man roger said and see what happens. thanx for advice.
Last edited by nomad; 11-07-2007 at 05:27 PM.
#99
Re: how to air box mod f4i
So I rode for the first time last night since doing this and I think it does pull a bit harder on idle, but damn... It takes so much more to clutch the bike up now