kleen air on my 636-good idea!
#81
Re: kleen air on my 636-good idea!
After cutting into pieces (about 5) a 1/2" thick by 1inch by 1/2" oil sponge then pushing them into the Kleen line, it still smoked when I merked it to far back the other day. I've gotten better at not bringing it back to far and keeping it in BP but wonder if I wanted to ever drag the bar that it would smoke like crazy again. This mod still works great but If your dragging at all watch out. This is my experience so maybe others are different.
Did yours feel any different Roger??? Regarding the smooth power N such??
Did yours feel any different Roger??? Regarding the smooth power N such??
#82
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
yes the power down low is better but i parked mine on the bar and didn' even get a puff of smoke i even left it there for a few seconds to see if it would smoke.....
do you know what that box is i posted a link on page 4 a couple posts back
do you know what that box is i posted a link on page 4 a couple posts back
#83
Re: kleen air on my 636-good idea!
03+ R6
u just block off the valve cover ports once u flip the reed valves, then urun a hose from the crank case arround the airbox back to the spot its suppose to go onto the air box.
u just block off the valve cover ports once u flip the reed valves, then urun a hose from the crank case arround the airbox back to the spot its suppose to go onto the air box.
#84
Re: kleen air on my 636-good idea!
Do you have your bar near stock tail or further>????
It looks like a sensor plug for vac or some other connection for FI. I can check my online manual when i get home tonight though.
#85
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
yea i have a home made round bar that comes out the tail light hole no cutting but it is way past 12 so i don't know why yours smokes so much...
and yes please check and tell me what this box does ,thanks
and yes please check and tell me what this box does ,thanks
#86
Re: kleen air on my 636-good idea!
Well mine is about 1inch and 1/2 to 2inch shorter then the stock tail so maybe thats why.
#87
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
yea may be but i would think mine would smoke like yours because when it's on the bar it is in the perfect position for oil to spill out that breather
#88
#90
Re: kleen air on my 636-good idea!
Damn your lucky, im not sure how i could have messed this up. Interesting......
#91
Re: kleen air on my 636-good idea!
i've heard good and bad from this mod, the thing that worries me is there is no outside ventalation to your crank case, resulting to pressure build up and seals blowing out....i just ran a long as tube up and around the radiator and back into the air box...i ran pcv valves for the longest time, they still leaked and created pressure in my crank case resulting in a blown valve cover gasket....
#93
Re: kleen air on my 636-good idea!
i've heard good and bad from this mod, the thing that worries me is there is no outside ventalation to your crank case, resulting to pressure build up and seals blowing out....i just ran a long as tube up and around the radiator and back into the air box...i ran pcv valves for the longest time, they still leaked and created pressure in my crank case resulting in a blown valve cover gasket....
#94
#95
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
i've heard good and bad from this mod, the thing that worries me is there is no outside ventalation to your crank case, resulting to pressure build up and seals blowing out....i just ran a long as tube up and around the radiator and back into the air box...i ran pcv valves for the longest time, they still leaked and created pressure in my crank case resulting in a blown valve cover gasket....
when done right the exhaust pulls a vaccum on the crank case not pressure
it works like an evacuation system on a drag car
#96
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
if the vaccum lines are intimidating you then just leave them all hooked up except the one that goes to the t in the middle of your valve cover and just plug that one and your done
#98
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#99
Re: kleen air on my 636-good idea!
that blow by pressure @15k rpm can/will push out your valve cover gasket and or stator cover gasket etc..
Blow by pressure escapes through the Crank case breather into the airbox... when u rout it back into the valve cover, your now creating a engine balloon
Blow by pressure escapes through the Crank case breather into the airbox... when u rout it back into the valve cover, your now creating a engine balloon
#100
Re: kleen air on my 636-good idea!
i thought the point was to get the oil that comes up the crankcase vent into the exhaust so it blows on out
Last edited by Hawco; 03-20-2007 at 06:19 PM.