kleen air on my 636-good idea!
#381
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
ok there are some 636 owners who have read this whole thread but didn't get it so imma try and explain this a different way
see the big hose in the picture above ,the one that has a black hose clamp on it and it isn't connected to any thing on one end ?
that hose needs to be connected to the big hose with the gold hose clamp on it in the picture below ,it also isn't connected to any thing on one end ..
ok now there is a little vacuum line in the first picture that goes to the back of the clean air valve thats the black plastic thing that the first big hose i talked about is connected to you need to take that little vacuum line off the clean air valve and put a long screw in that vacuum line and thats all you have to do to the hoses and lines..
the only other thing you have to do is plug the holes left in your air box that the two big hoses you connected use to go to....
you can replace both of those big hoses with one long hose or you can connect them in a number of ways but the objective is to by pass the air box....
see the big hose in the picture above ,the one that has a black hose clamp on it and it isn't connected to any thing on one end ?
that hose needs to be connected to the big hose with the gold hose clamp on it in the picture below ,it also isn't connected to any thing on one end ..
ok now there is a little vacuum line in the first picture that goes to the back of the clean air valve thats the black plastic thing that the first big hose i talked about is connected to you need to take that little vacuum line off the clean air valve and put a long screw in that vacuum line and thats all you have to do to the hoses and lines..
the only other thing you have to do is plug the holes left in your air box that the two big hoses you connected use to go to....
you can replace both of those big hoses with one long hose or you can connect them in a number of ways but the objective is to by pass the air box....
Last edited by old man roger; 01-06-2008 at 03:27 AM.
#382
Re: kleen air on my 636-good idea!
haha you probly put that up because of me, but i was just reading too much into it and confusing myself cuz so many peopel added things into it and didn't need to. its actually very easy for any bike really once you understand what your doing to it. got mine and my buddies done but wont get a chance to ride it till spring cuz of the damn snow up here
#384
Re: kleen air on my 636-good idea!
sorry man, i figured itd be easier to get the answer i was lookin for but i was just blind and not p[ayin attention to what the mod was i guess. my bad. piece of cake really
#386
Re: kleen air on my 636-good idea!
Yeah here's a link with pics for the 636 too.
Finally found it again:
http://public.fotki.com/garymilcheck...ods/kleen_mod/
Finally found it again:
http://public.fotki.com/garymilcheck...ods/kleen_mod/
#387
Re: kleen air on my 636-good idea!
Im stupid, those parts arent on my bike cause its Canadian and the other one was from Calafornia Got the mod done now I have to wait for another 2 or 3 months tell the snow goes before I can test it out.
#388
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
steve i just do it that way incase there is a back fire or some thing ...
the stock hoses are less likely to blow off then the little caps are ..
even if the stock hoses blew off they wouldn't go any where so i could just hook them back up ,if the little caps blow off they always dissapear
the stock hoses are less likely to blow off then the little caps are ..
even if the stock hoses blew off they wouldn't go any where so i could just hook them back up ,if the little caps blow off they always dissapear
#389
Re: kleen air on my 636-good idea!
Thanks for the help, I have clamps around the caps so hopefully they dont come off. When I get the bike out for a day im going to hall the tank and stuff back off to check if everything is still in place and working ok.
#390
Re: kleen air on my 636-good idea!
hi people i have a f4i and when out yesterday it hydro locked so when i try to start it just makes a click noise how do i free the motor up i have took plugs out cleaned air box and tryed to bump it in second but still not worked does anyone have ideas please
#392
Re: kleen air on my 636-good idea!
defiantly a good idea... i didnt the first week i had mine... changed plugs like 3 times before it started running good again... but i also was doing stalls etc.... but if you been stunting it with this not done, make sure you clean your air box good, if you see oil in it
#393
Re: kleen air on my 636-good idea!
#394
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
if it still wont turn over with the plugs out and every thing else is ok like the battery and starter then you may have bent a rod and locked that bitch up ...... when you get your new motor do the this mod........
#395
Re: kleen air on my 636-good idea!
my engine got hydro locked 2 days ago and bent conrod when i tryed starting it shot a hole through the engine wish i see this thread ages ago when i get new engine this mod will be first thing i do
#397
Re: kleen air on my 636-good idea!
I did the "Graves smog block off" mod on my R1. Is this basically the same concept?
I've seen it done where you take the reeds and flip em back words, and just cap off the hose lines. Then cap the old lines for the air box.
Are these 2 different mods? Or just different ways to do the same thing?
I want to do this for my 929, so any help is appreciated.
- Pixel -
I've seen it done where you take the reeds and flip em back words, and just cap off the hose lines. Then cap the old lines for the air box.
Are these 2 different mods? Or just different ways to do the same thing?
I want to do this for my 929, so any help is appreciated.
- Pixel -
#398
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: kleen air on my 636-good idea!
that is a different mod this one is better because it creates a vacuum in the crank case and the other way creates pressure and thats really not a good idea
#399
Re: kleen air on my 636-good idea!
So on my 929... I "T" the hoses like in the pics, and leave the parts with the reeds in em alone. I plug the 2 holes in the air box where I removed the lines.
Are their any vacuum lines near the throttle bodies I'll need to cap?
Are their any vacuum lines near the throttle bodies I'll need to cap?
#400
Re: kleen air on my 636-good idea!