handbrake DIY question...HELP!
#1
handbrake DIY question...HELP!
Crazy question...
Is there a way to build a handbrake without being forced to use a second caliper on rear disc?
Can I connect to rear master cylinder with a long line from the barz?
Do I have to use another master cylinder in front too?
I'd like to get a **** like this...
stepping on rear brake sometimes proves to be dificult
:YEAHthanx for advice...
Is there a way to build a handbrake without being forced to use a second caliper on rear disc?
Can I connect to rear master cylinder with a long line from the barz?
Do I have to use another master cylinder in front too?
I'd like to get a **** like this...
stepping on rear brake sometimes proves to be dificult
:YEAHthanx for advice...
#3
#5
Re: handbrake DIY question...HELP!
thanx guys...
you saved me a lot of time,money(beers)...
it so ****in hard to get anything in Poland...
the best solution I saw in mu country is having another caliper welded next to the rear one,and then getting it connected to the barz...
sound crazy but its supposed to work...
but I think I gonna stick to throwing the reservoit out and making a line to the master cylinder in the left hand bar...
oh,and how the hell am I supposed to get a left hand master cylinder?
will any hydraulic clucht application work well enough?
any ideas?
I appreciate any help...
Its a DIY world in here...
p.s. FTP!!!
you saved me a lot of time,money(beers)...
it so ****in hard to get anything in Poland...
the best solution I saw in mu country is having another caliper welded next to the rear one,and then getting it connected to the barz...
sound crazy but its supposed to work...
but I think I gonna stick to throwing the reservoit out and making a line to the master cylinder in the left hand bar...
oh,and how the hell am I supposed to get a left hand master cylinder?
will any hydraulic clucht application work well enough?
any ideas?
I appreciate any help...
Its a DIY world in here...
p.s. FTP!!!
Last edited by uneetra; 10-17-2006 at 02:22 PM.
#7
Re: handbrake DIY question...HELP!
Originally Posted by uneetra
thanx guys...
you saved me a lot of time,money(beers)...
it so ****in hard to get anything in Poland...
the best solution I saw in mu country is having another caliper welded next to the rear one,and then getting it connected to the barz...
sound crazy but its supposed to work...
but I think I gonna stick to throwing the reservoit out and making a line to the master cylinder in the left hand bar...
oh,and how the hell am I supposed to get a left hand master cylinder?
will any hydraulic clucht application work well enough?
any ideas?
I appreciate any help...
Its a DIY world in here...
p.s. FTP!!!
you saved me a lot of time,money(beers)...
it so ****in hard to get anything in Poland...
the best solution I saw in mu country is having another caliper welded next to the rear one,and then getting it connected to the barz...
sound crazy but its supposed to work...
but I think I gonna stick to throwing the reservoit out and making a line to the master cylinder in the left hand bar...
oh,and how the hell am I supposed to get a left hand master cylinder?
will any hydraulic clucht application work well enough?
any ideas?
I appreciate any help...
Its a DIY world in here...
p.s. FTP!!!
#8
Re: handbrake DIY question...HELP!
ok...
so if anything radial/non radial works...then I'd have to flip the master cylinder over to make it fit in the left side...then how can I make it work as its going to (probably) swallow air out of the cylinder (which is upside down)?
is overfilling the solution?
argh!
so if anything radial/non radial works...then I'd have to flip the master cylinder over to make it fit in the left side...then how can I make it work as its going to (probably) swallow air out of the cylinder (which is upside down)?
is overfilling the solution?
argh!
#10
Re: handbrake DIY question...HELP!
oh...
cool...
okay-next thing after I finish welding my engine crash cage(another DIY project),is going to be the handbrake system.just need to get my hands on some parts(wrecked bikes)...since its end of the season in here...I am going to have some time to play with that...
thanx a lot guys.
I would **** my pants trying to work all of those things out myself...
peace!
stunting is not a crime! FTP!
cool...
okay-next thing after I finish welding my engine crash cage(another DIY project),is going to be the handbrake system.just need to get my hands on some parts(wrecked bikes)...since its end of the season in here...I am going to have some time to play with that...
thanx a lot guys.
I would **** my pants trying to work all of those things out myself...
peace!
stunting is not a crime! FTP!
Thread
Thread Starter
Forum
Replies
Last Post