have any of you got any ideas
i just put a new motor in the bike and it seems to be fine sounds nice and tight,but the bike has no power under acceleration wont power wheelie at all and gets all choked up if you snap the throttle open although it will rev out if you let it build slowly,to me it seems like it is starved of fuel but the pump seems to work good have checked all the vacume hoses cleaned out the fuel rail flushed through injector cleaner and am stumped any ideas

also on the old motor all the stuff worked fine or so i thought

 

didnt you buy an A1P engine? whats the engine number? i will check for you

 

Fuel pump keith take it out clean out the tank blow it throw and put it back on try that first or new ebya pump

 

Keith take the fuel pump out of the tank, take the two philips screws out of each side, take both the wires of aswell gently prize the pump away from the body then take the filter off and give it a clean.

 

so far this has to be the most helpful thread I've seen. no one has made any jokes. yet...

 

Should've kept the honda.

 

ed the engine number is ZX636AE028890 and will take the pump apart and have a look at the filter i thought they couldnt be serviced though ******* bike is a nightmare i just want to ride and dave still got the blade have had to use that for my fix

 

pulled the fuel pump apart and cleaned it out no joy going to try a friends tank on there as soon as i can it is doing my head in

 

hope you get it sorted soon mate!! could the fuel lines from the tank be getting kinked when the tank goes on? that happen to me not long ago.....

 

Airbox not on properly maybe? When i put a cbr motor in the Hornet it ran like **** cos of the airbox.

Have you taken the nose fairing off and covered up the air intake with a headlight?

 

tried a mates pump on it and prod went away good call toby/dave just got to buy a new pump now

 

might be wrong but i think a gsxr 600 fits??

 

nice one keith glad you got it sorted they are a bit of a bitch mine was blocked up with crap cos i ran out of fuel a few times but seems to be ok at the mo so just a bit of dirt clogged in there i just blow it through with airline but i will do what dave said in future going to write it on my workshop wall tmz ha ha