It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
#1
junki stunts
Thread Starter
Join Date: Jan 2004
Location: under the streets n fla
Age: 44
Posts: 1,748
It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
blown motor....
good news is that the 636 front end and wheels fit niceley...
good news is that the 636 front end and wheels fit niceley...
Last edited by H-cane; 01-03-2007 at 02:43 AM.
#4
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
636 rear rim mounted right up to that thing?
#5
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
nice ...strong honda frame and the best forks kawi ever put on a bike..
and those newer kawi wheels are light as a feather..
i would make the kawi rear pegs fit on there if i was you they are way longer then the honda ones
and those newer kawi wheels are light as a feather..
i would make the kawi rear pegs fit on there if i was you they are way longer then the honda ones
#6
junki stunts
Thread Starter
Join Date: Jan 2004
Location: under the streets n fla
Age: 44
Posts: 1,748
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
nags- yea little shaving of the 636 wheel spacer
roger-good call i havent looked to see if they are even close.
roger-good call i havent looked to see if they are even close.
#7
also known as OMR
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
oh **** i wasn't paying attention ..you used the kawi motor,nice nice
i rode an 06 636 the other day that motor is the **** ,so much power on idle i couldnt belive it
i rode an 06 636 the other day that motor is the **** ,so much power on idle i couldnt belive it
#8
junki stunts
Thread Starter
Join Date: Jan 2004
Location: under the streets n fla
Age: 44
Posts: 1,748
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
#9
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
Should be a sick bike
#14
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
05 636 forks = SHOWA BUILT so it is the best forks kawi ever used.
03-04 636 = KYB Junk
how long are the 600rr forks, io know the 636 forks are 30 inchs from absolute bottom to the fork caps, couple u messure the length of the 600rr forks?
03-04 636 = KYB Junk
how long are the 600rr forks, io know the 636 forks are 30 inchs from absolute bottom to the fork caps, couple u messure the length of the 600rr forks?
Last edited by Wheeliest; 01-03-2007 at 10:32 AM.
#16
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
whats weird is the 05+ stem is shorter and smaller diameter at the top and looks like hes useing the 03/04 top bridge which will leave like a 1/2 CM gap in the stem hole..
and those are def 05 forks cause those rotors wouldn't work with out spacing the calipers.
and those are def 05 forks cause those rotors wouldn't work with out spacing the calipers.
#17
junki stunts
Thread Starter
Join Date: Jan 2004
Location: under the streets n fla
Age: 44
Posts: 1,748
Re: It's alive "HONDASAKI" 600RR AND 636 ORLANDO MADDNESS
i think the radiator was just droped when i took pic.
i used 929 upper and lower clamps. used 3m shipping tape to make up the diffrence in the lower clamp because the 636 forks are not as thick (out side dimater) as the 929 but the top clamp was perfict. rubber mallet with a few swings and it fit snug...
i used 929 upper and lower clamps. used 3m shipping tape to make up the diffrence in the lower clamp because the 636 forks are not as thick (out side dimater) as the 929 but the top clamp was perfict. rubber mallet with a few swings and it fit snug...
#19