OMR SUBCAGES !!!!! new models available
#7224
Re: OMR SUBCAGES !!!!! new models available
No Doubt. thats what my brother starting to do now side jobs... thats where the real money is.. i was talking to my brother about it now.. i was thinking the storage place where i currently have my bike at.. they have open wharehouses with like 2 bays for like 250 a month.. if me and him split that... ill do all the prep work .. and he just paints..
#7226
Re: OMR SUBCAGES !!!!! new models available
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#7235
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: OMR SUBCAGES !!!!! new models available
#7236
Re: OMR SUBCAGES !!!!! new models available
i wish i was ballin like that or i would, i really hate HH's. thanks thow i might make it out tomorrow if i decide to waste more money on HH's.
#7238
Re: OMR SUBCAGES !!!!! new models available
dont have the rotor killing problem, just when they get half life they fade bad. dont know if it from the heat cycles but even with no glaze on the pad or rotor they suck almost worse then having a single piston caliper.
#7239
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: OMR SUBCAGES !!!!! new models available
usually they grab good they just make so much heat they tend to kill rotors
#7240
Re: OMR SUBCAGES !!!!! new models available
thats the thing, ive had good sets and bad sets, i would think i had air in my brakes so i would bleed them and nothing would change, new set of pads made they lever feel stronger and brakes stronger everytime.