OMR SUBCAGES !!!!! new models available
#6521
Re: OMR SUBCAGES !!!!! new models available
#6522
Re: OMR SUBCAGES !!!!! new models available
#6523
Re: OMR SUBCAGES !!!!! new models available
most of the stuff out there is garbage and you need to eat like 6.....sounds like you finally got a decent one.....
#6527
#6528
Re: OMR SUBCAGES !!!!! new models available
when i used to sell that ****, id send one or 2 from each batch to get tested. one thing i discovered is that the material they form the pill from has a lot to do with the trip. theyre supposed to use **** that will dissolve in a few minutes, so it hits you hard, but they often dont. i remember one kind called mercedes' that were weak as ****, but when i got them tested they were very pure and should have been powerful. I discovered they would take almost a full day to break down in a glass of water, instead of half an hour.
#6530
Re: OMR SUBCAGES !!!!! new models available
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05 ,06, 07<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05, 06,07 <<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#6532
#6534
Re: OMR SUBCAGES !!!!! new models available
#6535
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
#6536
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: OMR SUBCAGES !!!!! new models available
so i was working on an 01 ZX7 this weekend. i did a bunch of work to it and turned it on and it stayed on for a minute. then it turned off and wouldn't turn back on. i checked wiring and all kinda ****. then i called roger and told him the symptoms. he said it was prolly a certain relay cuz i sometimes had to tap it to make it work. i got a matching relay from a 636 and it still wouldn't turn on. then i got on the left side of the bike and saw that the fuel **** was turned to OFF. i turned it to ON and the bike turned on. i wasted about 40 minutes with that ****.
#6537
#6539
Re: OMR SUBCAGES !!!!! new models available
Roger , i think im going to wait till i get a new frame to go out... i was thinking last night how bad it would suck to get pulled over and checked for paperwork. i should have the money by the end of this week or the beginning of next week.. (birthday, paypal claim, and paycheck)... should have enough to get the bar also. I know im prob pissing you off, my bad bro