Omr subcages !!!!!!!!!!
damn dude 
03-10-2009, 05:55 PM
#5503
Registered User
Join Date: Sep 2006
Location: St. Paul MN...
Posts: 11,214
Re: Omr subcages !!!!!!!!!!
Ok now I is confused...
I have (all from a 05/06 636) swingarm, caliper bracket, wheel, spacers, axle. The only 03/04 part is the sprocket carrier and its said to be the same....
but if I try to use both 05+ spacers it don't fit together...but if I use a front spacer instead of a rear on the right side it fits good
I have (all from a 05/06 636) swingarm, caliper bracket, wheel, spacers, axle. The only 03/04 part is the sprocket carrier and its said to be the same....
but if I try to use both 05+ spacers it don't fit together...but if I use a front spacer instead of a rear on the right side it fits good
03-10-2009, 05:57 PM
#5506
Administrators
Join Date: Jan 2006
Location: Arizona bbiittccheezzz
Age: 49
Posts: 55,201
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
03-10-2009, 05:58 PM
#5508
bp chaser
Join Date: Oct 2002
Location: LI, NY and I drive in Australia
Age: 47
Posts: 85,366
03-10-2009, 06:08 PM
#5515
bp chaser
Join Date: Oct 2002
Location: LI, NY and I drive in Australia
Age: 47
Posts: 85,366
Re: Omr subcages !!!!!!!!!!
Ok now I is confused...
I have (all from a 05/06 636) swingarm, caliper bracket, wheel, spacers, axle. The only 03/04 part is the sprocket carrier and its said to be the same....
but if I try to use both 05+ spacers it don't fit together...but if I use a front spacer instead of a rear on the right side it fits good
I have (all from a 05/06 636) swingarm, caliper bracket, wheel, spacers, axle. The only 03/04 part is the sprocket carrier and its said to be the same....
but if I try to use both 05+ spacers it don't fit together...but if I use a front spacer instead of a rear on the right side it fits good
see if the 04 and 05 spacers have the same part number
03-10-2009, 06:08 PM
#5516
Registered User
Join Date: Sep 2006
Location: St. Paul MN...
Posts: 11,214
03-10-2009, 06:12 PM
#5517
Registered User
Join Date: Sep 2006
Location: St. Paul MN...
Posts: 11,214
Re: Omr subcages !!!!!!!!!!
As per Johnny P The titanium colored spacers are the 05+ and the sliver are 03/04 only
The spacer that is said to be the right rear is thicker than the front spacer I have in it now by a few mm's....
I'm gonna take it apart and put a rotor on it and see how it all lines up..if its still all good I wont worry about it...
I will be around a little more now..
03-10-2009, 06:22 PM
#5520
Administrators
Join Date: Jan 2006
Location: Arizona bbiittccheezzz
Age: 49
Posts: 55,201
later 
