Omr subcages !!!!!!!!!!
#6082
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Omr subcages !!!!!!!!!!
yours was the only one i have seen like that but it made it clear the stock pin and clip should be replaced with a nut and bolt
#6086
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#6087
#6088
Re: Omr subcages !!!!!!!!!!
one of the best things you can do is replace the stock pin and clip that holds the peg in with a poly lock nut and a bolt , i have seen the stock pin and clip get pulled out from a crash and putting a nut and bolt on there ties the two tabs together , the stock pin doesn't really do that because the clip doesn't really have any strength......
i think i may just buy a box and start sending them with the subcage ...
i think i may just buy a box and start sending them with the subcage ...
#6089
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Omr subcages !!!!!!!!!!
one of the best things you can do is replace the stock pin and clip that holds the peg in with a poly lock nut and a bolt , i have seen the stock pin and clip get pulled out from a crash and putting a nut and bolt on there ties the two tabs together , the stock pin doesn't really do that because the clip doesn't really have any strength......
i think i may just buy a box and start sending them with the subcage ...
i think i may just buy a box and start sending them with the subcage ...
#6090
Re: Omr subcages !!!!!!!!!!
sonar sends a signal and whatever bounces back is used as a reading. neutron density readings send out neutrons that come back naturally, like a ball at the end of a rubber band. but the density of the area changes the speed at which it returns and that gives us our readings.
i'll be 32 the following tuesday
i'll be 32 the following tuesday
#6091
#6092
#6093
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Omr subcages !!!!!!!!!!
use the poly lock nut so you don't have to tighten the nut down to tight or double nut it so you can just snug the nut up against the tab and then lock it down with the other nut ....
#6094
Re: Omr subcages !!!!!!!!!!
Ive only been over the bars once but my bike hits the floor HARD multiple times every time I ride. Mike can back me on that and the fact that I beat my bike pretty bad. Cant wait to get all the **** I want on lock so I could get a new bike already.
#6095
Re: Omr subcages !!!!!!!!!!
Ima google what a poly lock nut is. Id probably know it if I saw one but not by name.
#6096
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Omr subcages !!!!!!!!!!
thats why i suggested a poly lock nut , it's the type of nut that has the plastic ring in it to keep the nut from backing off because you don't want to tighten the nut dow too tight or the peg wont fold in a crash and it will break
#6097
#6099
also known as OMR
Thread Starter
Join Date: Jul 2006
Location: OMR INDUSTRIES in west palm beach florida
Posts: 79,288
Re: Omr subcages !!!!!!!!!!
#6100
Re: Omr subcages !!!!!!!!!!
once my bike was laying on it's side with the motor still running. without thinking i picked it up by the 12 bar and as soon as the tire touched the ground the bike just took off and ran into a light post.