Omr subcages !!!!!!!!!!
#4901
#4902
Re: Omr subcages !!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600 - 01, 02, 03, 04, 05<<<click here
- GSXR 750- 00, 01, 02, 03, 04, 05
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#4903
Re: Omr subcages !!!!!!!!!!
Last edited by Trachito; 03-09-2009 at 11:09 AM.
#4906
Re: Omr subcages !!!!!!!!!!
The other thing that was stressful Friday was when I went to change my breaks I had a **** of a time getting just my pads off cause tehre were these two large pins holding them in that made it really hard to get them out. After I did get them out one of the pistons on each caliper didn't retract so I had to buy new calipers and a new break line. So I didn't get done with that till about 11 on friday night. But I'm glad I got it done.
#4909
Re: Omr subcages !!!!!!!!!!
The other thing that was stressful Friday was when I went to change my breaks I had a **** of a time getting just my pads off cause tehre were these two large pins holding them in that made it really hard to get them out. After I did get them out one of the pistons on each caliper didn't retract so I had to buy new calipers and a new break line. So I didn't get done with that till about 11 on friday night. But I'm glad I got it done.
#4910
Re: Omr subcages !!!!!!!!!!
for a while back in teh late 90s i was selling E and banging dirty chicks. So of course, i was wearing condoms. I faked it a lot, with some of the hottest pieces on my resume too. Wearing a bulletproof condom in a heavily beat up ***** isnt the best for busting a nut.
#4911
Re: Omr subcages !!!!!!!!!!
****, i need a new cornea on my right eye. i'm less than 18 inches from my screen and i can't make out some of the words. my prescription only helps a little bit but not much. i have a scratch going down the center from an accident that happened years ago.
#4912
Re: Omr subcages !!!!!!!!!!
They were like 50 a side not too bad just frustrating to have to go out and get parts at 8 at night half way through a job.
#4913
Re: Omr subcages !!!!!!!!!!
The other thing that was stressful Friday was when I went to change my breaks I had a **** of a time getting just my pads off cause tehre were these two large pins holding them in that made it really hard to get them out. After I did get them out one of the pistons on each caliper didn't retract so I had to buy new calipers and a new break line. So I didn't get done with that till about 11 on friday night. But I'm glad I got it done.
what do you ride?
#4914
#4915
Re: Omr subcages !!!!!!!!!!
an ex of mine had a loose puss but she hadn't fucked a lot in her life. she just wasnt built tight. i faked it on her a ton.
#4916
Re: Omr subcages !!!!!!!!!!
I uncheck it most of the time cuz im sick of seeing it
#4918
Re: Omr subcages !!!!!!!!!!
actually, i was having that same problem. one of the pistons wouldn't go back in so i pushed the brake pedal and it popped out. then i slid it back in with some wiggling. putting the rubber sleeve back on was a bitch but i got it on there. then i pushed the piston in more with a C clamp, put on the new pads, bled the lines, and it worked just fine.
#4919
#4920
Re: Omr subcages !!!!!!!!!!
i think thats repairable now days