OnEWhEeLNEAL

I got one of these things below which Mike shaved down a little for me with the grinder to be able to fit in there. Then I took a socket and cut the 4 little notches for the outside spinner thingamijjy. If you need pics I can take em but Im sure you know what Im talkin about

http://parts.motorcycle-superstore.c...otion-pro.html

old man roger

i cant believe a hammer and punch didn't work ...a giant allen wrench might do the job

WHEELIE

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600 - 01, 02, 03, 04, 05<<<click here
• GSXR 750- 00, 01, 02, 03, 04, 05
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

Mr. Hooligan

I made one of them today...lol

it did not work

MikeM

id go spend the money on a big *** hex key

OnEWhEeLNEAL

that sucks. what tool are you ordering from kawi - the one for the spinning piece or a big hex key that goes in that shaft? If youre getting something that goes in there for $80 I would try that motion pro **** for $30. It works on the F4i

Mr. Hooligan

That's mostly how I mangeled the nut is with a hammer and punch....

I got to sears to late.. I was going to buy the monster 18mm Allen wrench

MikeM

****, just drill it out

Mr. Hooligan

Smoke time....brb

MikeM

is this a clean frame?

OnEWhEeLNEAL

Uh oh the clean frame debates are gonna start now

old man roger

mark gets his bikes from the auction so his **** is legit

OnEWhEeLNEAL

I know. Just havin some fun jeeeeeeez. Ight Im out to study

old man roger

sorry forgot the smiley guy at the end of my post ...lol

OnEWhEeLNEAL

Im getting me an impaktech cage next time I need one



**** looks diesel

Mr. Hooligan

if I did not need the shaft I would..I thought about it earlier

WHEELIE

THat looks like it should be on the front of a peterbuilt

OnEWhEeLNEAL

ight out for real

WHEELIE

I have one of these at work... Just have to check which size

Mr. Hooligan

yes
you are correct sir....

of my 3 636 frames...2 are waiting on state inspections for clean titles and the 3rd has a bill of sale from the auction

The bill of sale frame is going to replace the "bent" titled frame after I get this one that's torn down powder coated and put back together... And when I say replace I mean take it to the state with all paper work and have THEM re-stamp the VIN from the titled frame to the bill of sale frame..100% legit!!