Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
#7922
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda
pay pal accepted
Tech
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
OMR SUBCAGES available:
Honda
- CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
- CBR 954- all years
- CBR 929- all years <<< click here
- CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here
- GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
- GSXR 1000 -01, 02, 03, 04
- R6 - 03, 04, 05 <<< click here
- R6s (old body style) - 06, 07, 08
pay pal accepted
Tech
- The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
- The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
- THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
- All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
- omr subcages are available for all makes and models but only the ones listed above are available for shipping
click here to contact >> old man roger
the original folding peg subcage!!!!!!!!
>>click here to see why i only sell folding peg subcages<<
#7924
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
MikeM 1,038
Bray 767
Trachito 693
WHEELIE 468
old man roger 446
Juca 441
StrictlyStunt 440
Unknown_Tom 421
scott3824 411
Zuki750 311
OnEWhEeLNEAL 311
old duffer 265
JackMan 232
Miss Chievous 213
nina weee 198
chitos gonna pass bray in here
Bray 767
Trachito 693
WHEELIE 468
old man roger 446
Juca 441
StrictlyStunt 440
Unknown_Tom 421
scott3824 411
Zuki750 311
OnEWhEeLNEAL 311
old duffer 265
JackMan 232
Miss Chievous 213
nina weee 198
chitos gonna pass bray in here
#7925
#7926
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
#7927
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
powdercoat it, and redrill the holes. how hard is it to redrill holes through hardened powder? stop being lazy
#7928
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
They need to plug the holes with corks or something similar. You could also just ream out the holes after they do it. Hubs get powdercoated all the time.
#7930
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
WAP1(config)# boot system tftp igs-j-l.xxx-x.x 192.168.xxx.x
#7931
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
#7932
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
Im not being lazy and didnt really think it was a big deal. I said he could just cover the holes, or do the whole thing and ill redrill the holes thinking it would be easy to go thru the powder coat..... but since the person that suggested it to me that it wasn't going to work is a bike mechanic, I just assumed I was wrong and he knew best ..........
#7933
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
Im not being lazy and didnt really think it was a big deal. I said he could just cover the holes, or do the whole thing and ill redrill the holes thinking it would be easy to go thru the powder coat..... but since the person that suggested it to me that it wasn't going to work is a bike mechanic, I just assumed I was wrong and he knew best ..........
#7934
#7935
#7936
#7937
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
and i cant hit my tftp server because the ethernet port wont work. ive already done a hard reset, i think i might have to send it in.
#7938
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
Mike this is the only other way I know how to do it besides what I already suggested ....
http://www.cisco.com/en/US/products/...8015bfac.shtml
http://www.cisco.com/en/US/products/...8015bfac.shtml
#7939
Re: Omr Subcage !!!!!!!!!!!!!!!!!!!!!!!!!!
Im not being lazy and didnt really think it was a big deal. I said he could just cover the holes, or do the whole thing and ill redrill the holes thinking it would be easy to go thru the powder coat..... but since the person that suggested it to me that it wasn't going to work is a bike mechanic, I just assumed I was wrong and he knew best ..........
#7940