scoot do you know a way to load an IOS onto a WAP without a functioning ethernet port?

 

OMR SUBCAGE (S)
OMR SUBCAGES available:
Honda

• CBR F4i - 01, 02, 03 <<< click here, will also fit the single seat style with minor mods
• CBR 954- all years
• CBR 929- all years <<< click here
• CBR 600RR - 03 , 04 , 05 , 06 , 07 , 08<<< click here

Kawasaki

• zx6r/rr (636) - 03, 04, 05, 06 07 08<<< click here

Suzuki

• GSXR 600/750 -00, 01, 02, 03, 04, 05<<<click here
• GSXR 1000 -01, 02, 03, 04

Yamaha

• R6 - 03, 04, 05 <<< click here
• R6s (old body style) - 06, 07, 08

$175 Shipped
pay pal accepted

Tech

• The 03-06 CBR 600RR , 03-05 Yamaha R6 ,03 04 gsxr 1000 and the f4i pegs are lowered and moved back and out for better peg position! !
• The 01-03 GSXR 600 and 750 have the pegs moved out two inches because of the big tail section
• THE 07 600RR pegs are located 2-1/2 inches lower and 3 inches wider (Than stock)
• All other omr subframe cage models are in the stock location except they are rotated on their axis so they don't fold up unless you fold them up, this also puts your foot on the grippy part of the peg during a wheelie.
• omr subcages are available for all makes and models but only the ones listed above are available for shipping

click here to contact >> old man roger

the original folding peg subcage!!!!!!!!

>>click here to see why i only sell folding peg subcages<<

 

other than serial?

 

MikeM 1,038
Bray 767
Trachito 693
WHEELIE 468
old man roger 446
Juca 441
StrictlyStunt 440
Unknown_Tom 421
scott3824 411
Zuki750 311
OnEWhEeLNEAL 311
old duffer 265
JackMan 232
Miss Chievous 213
nina weee 198

chitos gonna pass bray in here

 

serial is all ive got right now. the console port works, but im not sure how to use xmodem. it seems like it should be really easy but its not happening lol

 

I just found out I cant powdercoat my rear hub for the 50 because the holes will get clauged and i wont be able to re spoke it.... any suggestions ? this really ***** things up and im upset

 

powdercoat it, and redrill the holes. how hard is it to redrill holes through hardened powder? stop being lazy

 

They need to plug the holes with corks or something similar. You could also just ream out the holes after they do it. Hubs get powdercoated all the time.

 

time to drive roadhook


who somehow has more achievements than i do

 

can you use the boot system command to send it to a tftp server? i.e:

WAP1(config)# boot system tftp igs-j-l.xxx-x.x 192.168.xxx.x

 

poppy **** ... the powder coater should be able to plug them

 

Im not being lazy and didnt really think it was a big deal. I said he could just cover the holes, or do the whole thing and ill redrill the holes thinking it would be easy to go thru the powder coat..... but since the person that suggested it to me that it wasn't going to work is a bike mechanic, I just assumed I was wrong and he knew best ..........

 

I drilled out a couple holes in some hand controls I had done. No problem whatsoever.

 

no, not into that at all. didn't even know anyone was into that **** other than chics doing it to each other.

 

Yea.... I thought it was just common sense to plug the holes with something, thats why I got confused when he said he couldn't do it ....

 

You can use this method by breaking the boot of the AP ....

 

it wont boot, says no such file or directory when it trys to load flash.

and i cant hit my tftp server because the ethernet port wont work. ive already done a hard reset, i think i might have to send it in.

 

Mike this is the only other way I know how to do it besides what I already suggested ....

http://www.cisco.com/en/US/products/...8015bfac.shtml

 

then he is lazy, or jealous of your bling lol

 

i love it when the chicks swap it with each other